PDA

View Full Version : VW caddy won't go more tha 2800 RPM



evisdaci
13th October, 2019, 01:18 PM
Hello everyone,

I have a VW caddy 1.6 TDI 2011 and I have a problem with it. Problem is the car can not go more than 2800 RPM during moving and without moving. All the time can not go more than 2800RPM. I have make diagnostic and no error code present. All the time I have no error code present. I have check every fuse and all are OK. When I start the car for about 30 second or 1 minute everything is OK and RPM go 5500RPM but after 30 second or 1 minute RPM go down and not go more than 2800RPM. Any idea with this problem, or anyone have same experience with this problem

pitstop
13th October, 2019, 02:01 PM
If there are no errors you should deal with the parameters and see what is wrong there, what tool did you read the errors?

evisdaci
13th October, 2019, 07:37 PM
I jave try with Delphi diagnostic and Launch diagnostic.

Any idea ??

autoden
14th October, 2019, 07:47 AM
Check if it has a clutch switch.

evisdaci
14th October, 2019, 02:37 PM
Now I make a test again with car now I have this error : P261A (Coolant Pump B, Open Circuit). I think this error can make car limp mode. I have change this pump and this pump work but the error is the same. So can anyone remove this pump from ECU flash ? I have try to remove DTC OFF (to remove this error), but no succes. So anyone can help me ????

evisdaci
14th October, 2019, 08:58 PM
Any idea ???

evisdaci
15th October, 2019, 09:15 AM
I solve the problem, I remove EGR from flash dump and remove the error from dump. Now everything is OK

jaffer22
15th October, 2019, 09:36 PM
I would have also said EGR. Sometimes trying a blanking plate can circle out the problem. Only issue in VAG common rail engines, the EGR is behind the engine and very hard to get to.

Anyway nice job

:)