View Full Version : 38906012HA-SG Tuning
Cotulla
14th October, 2019, 07:27 PM
Hello,
I'm tuning a Skoda Octavia 90HP ALH 2005 VEP (EDC15VM+)
I found the smoke limiter on address 4D492 but it doesn't work. While live testing with Vag-com it reported it's still limited by Airflow with 38mg. while it should read 45mg. I tried changing the coding to automatic to see if I got the wrong map but still only reading 38mg. Measured airflow being well above 850mg/str everytime.
What could be the problem here? I don't seem to find any more smoke limit maps than that two (4D492 and 6D492).
naskochipa
14th October, 2019, 08:03 PM
Hello,
I'm tuning a Skoda Octavia 90HP ALH 2005 VEP (EDC15VM+)
I found the smoke limiter on address 4D492 but it doesn't work. While live testing with Vag-com it reported it's still limited by Airflow with 38mg. while it should read 45mg. I tried changing the coding to automatic to see if I got the wrong map but still only reading 38mg. Measured airflow being well above 850mg/str everytime.
What could be the problem here? I don't seem to find any more smoke limit maps than that two (4D492 and 6D492).
First you lost a lot of cards and at least you didn't touch the voltage of the pump
First you lost a lot of cards and at least you didn't touch the voltage of the pump
naskochipa
14th October, 2019, 08:22 PM
Hello,
I'm tuning a Skoda Octavia 90HP ALH 2005 VEP (EDC15VM+)
I found the smoke limiter on address 4D492 but it doesn't work. While live testing with Vag-com it reported it's still limited by Airflow with 38mg. while it should read 45mg. I tried changing the coding to automatic to see if I got the wrong map but still only reading 38mg. Measured airflow being well above 850mg/str everytime.
What could be the problem here? I don't seem to find any more smoke limit maps than that two (4D492 and 6D492).
pass- PM :)
Give a repot and thank you and you'll get a password
126HP 306NM
Cotulla
14th October, 2019, 08:42 PM
First you lost a lot of cards and at least you didn't touch the voltage of the pump
First you lost a lot of cards and at least you didn't touch the voltage of the pump
Why did I lose a lot of cards, can you explain? Pump voltage needs no change as I'm not requesting more than 51mg.
Isn't 300+ NM way too much for the gearbox, I've read that one should not push for more than 270NM as the gearbox won't handle it?
I pressed thank you, what do you mean with report?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.