Renault Megane/Scenic III 2015+ card coding

[obdserwisPL]

Hello

Need solution for coding cards/key for Renault my 2015+, mainly to Megane/Scenic III and Trafic/Master 2016+

All of above failed to program via Renault ECU tool / Xpad X100 / OBDstar x300 due to new algorithm of code

As I know, CLIP can do it, but need online connection or access to Codes repository.

Anyone help?

Regards

[RIMKACHIP]

Renault ecu tool works fine for megane 3 scenic 3 2015+. But trafic master 2016+ ?? AES key or id46 ?


Envoyé de mon iPhone en utilisant Tapatalk

[obdserwisPL]

Renault ecu tool works fine for megane 3 scenic 3 2015+. But trafic master 2016+ ?? AES key or id46 ?


Envoyé de mon iPhone en utilisant Tapatalk

Renault ECU tool not works with Scenic III 2016 - tested (any of 2009- 2014 Meg/Sce II no problem)

In Trafic 2016 there is Hitag-AES 4A chip (PCF7961)

[RIMKACHIP]

Ok only avdi works fine for this system. Lonsdor can do trafic but difficult and not ready but possible. With Clip only online Renault.net you must have autorisation of factory Renault.


Envoyé de mon iPhone en utilisant Tapatalk

[obdserwisPL]

659204 There is a log from trying to code new card on Scenic III

[TERMINATOR1000]

659204 There is a log from trying to code new card on Scenic III

tool can't communicate on 2015+ Scenic III

[p1et]

AVDI only reliable tool for these at the moment. With Lonsdor I've seen someone made with success Scenic 2016 but I think more often it fail.

[Staafonline]

did a 2016 master today with lonsdor ID46 pcf7947 without problems going to do a trafic 2015+ in the comming days to see if lonsdor works for it

[p1et]

did a 2016 master today with lonsdor ID46 pcf7947 without problems going to do a trafic 2015+ in the comming days to see if lonsdor works for it

Master no problem to do, 2016 still got 7947 as you described which most of the tools on the market can do. Trafic/Vivaro is different story but I hope you will have success - good luck and report back results please.

[sjc1]

Obdstar x300dp does new trafic/vivaro and new clio4 megane 3/4 etc

[TERMINATOR1000]

Obdstar x300dp does new trafic/vivaro and new clio4 megane 3/4 etc

in parking floor level - 4 without internet this tool can't touch this !

[obdserwisPL]

Obdstar x300dp does new trafic/vivaro and new clio4 megane 3/4 etc


For me X300dp failed on 2016 Trafic. Read EEPROM via OBD, but did nothing else. Got 'Can't read file'

Master 2016 with PCF7946/7947 should work ok with Renault ECU tool, but PCF7961 (newer type) no


Yesterday completed job on Scenic III 2016 via CLIP online, and for me there is only one way for now to do this

[Staafonline]

Master no problem to do, 2016 still got 7947 as you described which most of the tools on the market can do. Trafic/Vivaro is different story but I hope you will have success - good luck and report back results please.

Did trafic 2015 today and flashing pincode reading and programming key was all ok with Lonsdor k518
659684

[gueswhat]

Did trafic 2015 today and flashing pincode reading and programming key was all ok with Lonsdor k518
659684


wich version you have ??

[TERMINATOR1000]

Did trafic 2015 today and flashing pincode reading and programming key was all ok with Lonsdor k518
659684

need internet connection ?

[RIMKACHIP]

need internet connection ?

No need internet connection. Megane 4 obdstar x300 no need internet connection too.


Envoyé de mon iPhone en utilisant Tapatalk

[TERMINATOR1000]

you'r sure ? I operate many time on no phone zone ( & no internet ! ... city parking -3 ) , i search one tool able to doing the job without connection ...


https://youtu.be/seu6UC5ZMyc?t=88

& i never bougth online tool ... token tool ... trial tool + 600€/Y .... yearly pay to use tool ....

[Staafonline]

need internet connection ?

No internet connection needed, i was sceptical that it even would work but finished the job very quick.
I hav the k518ise