Ducato EDC17C49 problem dpf

[seba_m_]

Hi guys. I have a problem with fiat ducato 2.0 ecu edc17c49. Off dpf but the car has white smoke. I will do all the rests in ecu. Combined temperature sensor detachment, differential pressure sensor detached and then the same, white smoke. Swiftek solution corrected manually. In ecu it is impossible to complete the regeneration with any tester. All the time there is the message "regeneration not completed". Maybe here is the problem? Are you able to help? attach the files.
Thanks

[pike]

Hi,

you reset soot with original file?

[johak]

hi, try this solution

[seba_m_]

I will test, I will give a report 30 minutes

[seba_m_]

johak, still the same, white smoke, In the parameters: temperature dpf (-71) degrees Celsius, soot DPF 71%, I do not know why it increases as it was deleted at 0

pike, yes, the soot reset was the original file, everything was deleted, regeneration was not completed

[pike]

You need reset soot, make replacement DPF with original file, make sure everything is reset and then write right DPF off solution.