lukasSVK1
20th October, 2019, 10:04 AM
Hi,
I really need your help. I own Fiat Stilo 1.6 16v 2005 ECU: IAW 5NF.T1 . One tantal capacitor blew up in ECU because of connecting ECU while battery was connected ... And every time when RMP drop below 1000 , car will not respond to gas pedal. And It will throw this Error : Pressure Sensor
I even replaced all of the sensors , seals and so one ... Nothing helped ...
But anyway I have another ECU from wrecked car. When I replace Immo box and ECU , car is not throwing any errors .... Just ABS unavailable (Because the ECU from the wrecked car had ABS + ASR, mine only have ABS , it's different ABS computer ) , and after 10 starts or so , car will just turn off the engine and won't start because of non-compliance with IMMO .
I need to clone my ECU to the second ECU ...
3 months ago I bought Galletto 1260 cable. The only thing I was able to read was FLASH . So I was reading about it, but I did not find anything useful ... I decided to buy KESS V2 European Clone ... As KESS is supporting my car and I thought that It will read everything through OBD2 port ... Well the only thing I was able to read was again FLASH ... I tried writing my original FLASH to second ECU but KESS threw error saying "Change of speed not possible"
I need to CLONE my ECU do another ECU... So it means that I need to read EEPROM.
...
I really do not know what to do about it ... I really need your help and really detailed tutorial how to do it.
I really need your help. I own Fiat Stilo 1.6 16v 2005 ECU: IAW 5NF.T1 . One tantal capacitor blew up in ECU because of connecting ECU while battery was connected ... And every time when RMP drop below 1000 , car will not respond to gas pedal. And It will throw this Error : Pressure Sensor
I even replaced all of the sensors , seals and so one ... Nothing helped ...
But anyway I have another ECU from wrecked car. When I replace Immo box and ECU , car is not throwing any errors .... Just ABS unavailable (Because the ECU from the wrecked car had ABS + ASR, mine only have ABS , it's different ABS computer ) , and after 10 starts or so , car will just turn off the engine and won't start because of non-compliance with IMMO .
I need to clone my ECU to the second ECU ...
3 months ago I bought Galletto 1260 cable. The only thing I was able to read was FLASH . So I was reading about it, but I did not find anything useful ... I decided to buy KESS V2 European Clone ... As KESS is supporting my car and I thought that It will read everything through OBD2 port ... Well the only thing I was able to read was again FLASH ... I tried writing my original FLASH to second ECU but KESS threw error saying "Change of speed not possible"
I need to CLONE my ECU do another ECU... So it means that I need to read EEPROM.
...
I really do not know what to do about it ... I really need your help and really detailed tutorial how to do it.