View Full Version : INSTRUMENT CLUSTER VOLVO S60 diesel year 2003 NOT DISPLAY INFORMATION
sfmaldo
21st October, 2019, 08:03 PM
Hi
have problem with this instrument cluster.
Car instrument have micro MC912dg128a with porth can bad.
The donor instrument, some micro, conect with scaner but not display information.
Some have experiencie in this instrument?
Upa read eeprom in circuit but not clone all the micro.
Thanks
jomberykaso
21st October, 2019, 08:11 PM
if you need i can post pinout to read that processor with upa
sfmaldo
21st October, 2019, 08:36 PM
Hi
Thanks
I can read with upa eeprom and all memory, but upa not program all memory.
You clone micro 3k91d with upa? how ?
What programer for read and clone this micro work fine?
Thanks
bodzio012
21st October, 2019, 08:41 PM
You need to resolder all legs of hc912 and resistors next to hc912
junmab
21st October, 2019, 09:55 PM
jomberykaso do please post the connection of stable reading/writing with upa. I tried both my old uusp and my newer uuprog-s but could not clone it.
xyznia
22nd October, 2019, 12:08 PM
here pinout for reading,allways resolder small green resistors 4in1
junmab
22nd October, 2019, 12:34 PM
Thank you xyznia. Your picture is for X912 tool which is reading the FLASH and EEPROM, but as far as i can remember
it writes only the EEPROM (for changing the km).
I would prerfer o clone the dash using my UUPROG-S.
sfmaldo
22nd October, 2019, 03:01 PM
Hi
What programmer for clone the eeprom and flash of this micro?
Thanks
sfmaldo
22nd October, 2019, 03:01 PM
It s ok
Micro can port not work
jomberykaso
22nd October, 2019, 03:13 PM
Thank you xyznia. Your picture is for X912 tool which is reading the FLASH and EEPROM, but as far as i can remember
it writes only the EEPROM (for changing the km).
I would prerfer o clone the dash using my UUPROG-S.
Pinout is standard. You only need to know what is bkgd, reset, ground and vcc.
xyznia
22nd October, 2019, 03:24 PM
Hi
What programmer for clone the eeprom and flash of this micro?
Thanks
upa-s, xprog will clone without problem, mcu is not secured
sfmaldo
22nd October, 2019, 06:20 PM
Can clone eeprom, but how clone flash with upa? Thanks
sfmaldo
22nd October, 2019, 09:43 PM
How
Upa read eeprom but not flash.
912dg128a
I can read eeprom in circuit but not can read the flash.
Need eeprom and flash for clone.
Thanks
junmab
23rd October, 2019, 08:21 AM
I have the same problem like sfmaldo has. I can read the EEPROM, but i can not read the FLASH using my brand new UUPROG-S.
What a dissapointment.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.