PASSAT b7 edc17c46 transfer immo data

[immokill]

Hello

Please mates i have to change ecu EDC17C46 i have used ecu wuth same number ,can someone transfer immo data from old to new ecu please .

Thanks

[rafal]

hi
look pm................

[immokill]

Thanks but I cant do it if someone can help me , please .
Thanks



Sent from my TELEFON

[tothzsolt]

immokill (https://www.digital-kaos.co.uk/forums/member.php/58057-immokill)

hi test and report
t
clone eeprom ok
thnx........pass pm

[dustin2014]

Thanks but I cant do it if someone can help me , please .
Thanks


heres new eeprom file


Sent from my TELEFON

heres new eeprom file

[immokill]

This two files are not the same ? I will try and report .

[immokill]

Do I need to write only eeprom modified or need to put old flash on new ecu?


Sent from my TELEFON

[immokill]

immokill (https://www.digital-kaos.co.uk/forums/member.php/58057-immokill)

hi test and report
t
clone eeprom ok
thnx........pass pm


This file dont start ! and coding is from new ecu .New ecu is from car with dsg but mine old ecu is from car with manual transmision , I cannot change coding because request is out of range .

mine coding is 00190012042401080000

Please I need help to clone this ecu !

Do I need to write flash from old ecu ?
I need please tested solution to start this car please mates
thanks
Regards

[kuebk]

Write OLD flash with cloned eeprom.

[immokill]

What about coding ecu ?


Sent from my TELEFON

[kuebk]

It's stored in eeprom - there should be no issue.

[immokill]

I tried eeprom from user tothzsolt with flash from new ecu and didnt managed to recode ecu with vcds original . New ecu was from car with dsg gearbox , old ecu is with manual 5speed ,car will not crank.
I didnt try second eeprom in this post . I will put second eeprom and old flash in new ecu but I think that cloning old ecu and immo off in eeprom and flash is last solution.
Or maybe
someone can put my old ecu coding in eeprom ? I thing that car will start because mine is manual gearbox.

Please mates help me to clone old ecu immo and coding to new ecu .
Thanks

[kuebk]

Put OLD flash and attached eeprom to NEW ecu.