PDA

View Full Version : BMW 320D 163hp e90 need stage 1 +++



razvanrms
24th October, 2019, 11:56 AM
Hi ! I need Stage 1 + for my personal car , bmw320d 163cp . In the past i had a bmw 330d e46 and now i feel powerless =)) .

The car is in very good mechanical condition .

HW 0281012334
SW 1037389882

Thanks in advance !

SabeFacu
24th October, 2019, 12:16 PM
Hi, here you have! (Tested 100% solution) First thanks and + rep for pass

Lambda1
24th October, 2019, 01:49 PM
This car isnt as powerfull at stage 1 :(.
No much gains from M47 with Stage 1 in conclusion to 330d M57 :D.

rfernandes
24th October, 2019, 01:57 PM
This car isnt as powerfull at stage 1 :(.
No much gains from M47 with Stage 1 in conclusion to 330d M57 :D.

Those mit tf turbo arent good as garret...so do not espect much from that turbo

ohkarol
24th October, 2019, 02:07 PM
i've had same car on dyno last month , we achieve 201 ps - 420nm ,(dpf removed)

rfernandes
24th October, 2019, 02:17 PM
i've had same car on dyno last month , we achieve 201 ps - 420nm ,(dpf removed)
me to....my one on dyno shows 199hp and 450nm
but turbo are not good as i said...i hybrid mine and never gets any problem...

Lambda1
24th October, 2019, 02:23 PM
Stage 1 mates... so no modifications, standard car.
Sure if you tune it there are more power possible.
Stage 2 = with Dpf delete I got 195ps, 4xxNM EWG.
Stage 1 , car was at the end ~183Ps , dont know anymore about nm.

But ooT

Nicetka
24th October, 2019, 02:36 PM
Comparing E90 20d to E46 30d, E90 is very slow.... I have on 2 PC remap file for this. If you are intrested it for free - send me pw :)

rfernandes
24th October, 2019, 03:06 PM
Stage 1 mates... so no modifications, standard car.
Sure if you tune it there are more power possible.
Stage 2 = with Dpf delete I got 195ps, 4xxNM EWG.
Stage 1 , car was at the end ~183Ps , dont know anymore about nm.

But ooT

my e91 163hp with just straight exhaust 199hp and near 450nm...drove the car 4 years with no problem on clutch
now have hybrid turbo,front mout ic,clutch stge 2 and staight exhaust..i dont take to a dyno but for sure more than 230hp

TSC2010
24th October, 2019, 08:50 PM
Hi ! I need Stage 1 + for my personal car , bmw320d 163cp . In the past i had a bmw 330d e46 and now i feel powerless =)) .

The car is in very good mechanical condition .

HW 0281012334
SW 1037389882

Thanks in advance !

here for you
make rep and thx is free
pass pm

Aliengtx
4th November, 2019, 12:54 AM
hi can some 1 please help with a map for my bmw320d e90 163bhp. something like this ( +35ps+70nm with egr delete popcorn limiter) thank

(https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=661636&d=1571946565)

Aliengtx
4th November, 2019, 02:22 AM
sorry that first file have a error here the new 1 thank u all

Staykov
7th August, 2020, 10:13 PM
Огромное спасибо!

Staykov
23rd February, 2022, 07:20 PM
can you give me rar pass?

Staykov
23rd February, 2022, 07:21 PM
can you give me soft?

khaos87
27th February, 2022, 02:31 PM
Hi, share your file from the car and i will do the software for you. Just attach your original file from the car! ;)
Regards

fatah82
18th July, 2022, 03:01 AM
hello,

I have a problems with my car BMW e90 163 Hp Year 2005, when I have water in fuel system, with INPA i get 3F30 default, rail pressure sensor, and it dose not cleared, and the value off rail pressor is fixed at 399,7 bars, even if the engine is not started, so i think that the flash of ECU can fixe the problem, and I tried to flash my calculator with mpps, but when I read it, I get a file of only 1 MB and the original files that I found are 2 MB whay? I used MPPS V13

Advanced Thanks

alonedark
18th July, 2022, 10:33 AM
If you pay a good posible get 215hp and 420 Nm but your car have it is good with stock car

fatah82
18th July, 2022, 11:16 AM
If you pay a good posible get 215hp and 420 Nm but your car have it is good with stock car

hello, thanks for your reply, my car is not so good physicaly to support this kinds of change, so i need juste fix the problem with the rail pressor, i changed a good sensor but the value dose not cleared on ecus, it still fixed at 399,7 in the memory even the engine is not started, and when it start the injectors are slamming !!!

thanks

alonedark
18th July, 2022, 11:40 AM
The mod is not necessary special for your car , need have your car in good conditions, because if you have the same fimware of your car , what is the problem to use a good mod with the same fimware,???? The problem is your car no the mod

alonedark
18th July, 2022, 11:42 AM
Many people they would like that his car with 400000km have the same engine with 70000km

tutzu
18th July, 2022, 12:52 PM
somebody post mappack fof this ...

fatah82
18th July, 2022, 01:24 PM
Many people they would like that his car with 400000km have the same engine with 70000km

yes, it is the good engine

fatah82
18th July, 2022, 01:30 PM
the reference of my ecu is the same with the first post hw 0281012334 sw 1037389882, but when i read ecu i get a dump file with 1 Mo only, and the origin (so all files founded has 2 Mo of size).