Audi TT 2003 Problem after programming

[Thos]

Hi program the TT cluster on the bench with dgiprog It read the right kilometres and put in the new kilometres without a problem after re-fitting cluster back to car The two bottom digital displays work and displays correct odometer reading but the centre display in the dash does not work and the car does not crank over
And anyone had a similar problem before?
Thanks

[castin]

Check connector on dash, meybee pin is broken., Unplug and plug in again.

[Thos]

Check connector on dash, meybee pin is broken., Unplug and plug in again.
Hii
All pins are ok