Renault Clio II Sirius 32 Immo Off needed

[jaxone]

Hello.

I would need a TESTED sollution for immo off on Siemens Sirius 32N for Clio II.
Immo Tool , Immo Service sollution do not work.

Please provide tested solution.
I can only flash this by OBD , On Bench I can not read with Ktag ... no comms with ECU.

Renault Clio 1.4 2001 Automatic

HW: 8200029658
SW: 8200204311
Engine K4JB7

Now full read.

Thanks in advance.

[kowal5]

you must read 29f400 or 29f200 serial programmer. Your reading is not correct. No data is areas 4000 -> 7FFF

[jaxone]

As you can see , the readout is attached.

[jaxone]

you must read 29f400 or 29f200 serial programmer. Your reading is not correct. No data is areas 4000 -> 7FFF

For some strange reason I can not boot this ECU :( Will Galletto read full ?

[Louislesinge]

Hi,
There is my own dump OFF made and tested.
Don't forget to cut 58 line on ECU.
Greetings,

[jaxone]

I have finally successfully booted the ECU.
Attached Full read.

[Louislesinge]

Here is your own file OFF

Please press "thanks" and reputation for the job.

[jaxone]

Here is your own file OFF

Please press "thanks" and reputation for the job.

Thanks , I managed to make it also by myself before I got your file, only see 3 diferences between my off file and yours.
One at 0x4000 , 0xFFE0 and 0xFFE1

Now car starts but LED in display still blinks.
Will your file make the LED go away or not ? (ECU is already packed and in the car and if it does not make a difference I would not take it out again)..

[Louislesinge]

Hi again,
See here, you have to remove PIN in 24 line
Greetings,

[Unocl]

I have finally successfully booted the ECU.
Attached Full read.

How you booted to read?