ABS wrong coding error after Cluster Swap

[vitorponte]

Hello,

Having trouble to correct this problem on Audi A3 8P 2004 BKD.

Original cluster died and owner replaced with other. Already copyed immo data from car to cluster and car is working normal and all immo functions working.

Now problem is ABS error 01044 - Control module incorrectly coded - implausible signal.

The coding that is on ABS is 0055942. Already tryed other codings that the ABS accept, but allways same error. Tryed 23174 and same thing.

The original cluster had DIS and this one not, Original dash - 8P0 920 930F, used Dash 8P0 920 900F, same year.

This ABS is a MK60 without long coding.

Thanks in advance.

[brend]

Need just right abs coding!

[vitorponte]

Need just right abs coding!

Hi Brend, thanks for your help, how can i get the correct coding?

[brend]

You can use for this Vas/Odis which code this istruction away ,simpel for work no need thinking just do it.
If you use VCDS for this need coding right login away.


Hi Brend, thanks for your help, how can i get the correct coding?

[yarowsc]

this is short coding - no problem with VCDS

[vitorponte]

VCDS can change the coding no problem, I am just having trouble with the correct coding. Car does not have the extras sticker in the boot already... Non of the 20000 range coding seem to fix the problem, and the coding that was on the ABS (55942) as nothing to do with the mk60 instalation list...

[yarowsc]

I have never had a problem with ABS coding in A3 8P, Golf MK V 2003-2008 year with short coding. the coding has always been the same. if you attach the original cluster to the car, the coding error from the ABS module memory goes to erase ??

[vitorponte]

Original cluster is dead, so no comms with it... Didn´t tried with old cluster if abs has error, but I know that the error is because of new cluster...

Did some search about adaptation 37 of cluster. Will try making some changes there to see if makes any difference when I have the car again. Atual coding is just "1". f