renault trafic immo problem

[repair4]

i have problem with immo red blink flashing
renault trafic 2007
ecu 0281012658 how can i fix immo thanks for helping

[Manta1600]

i have problem with immo red blink flashing
renault trafic 2007
ecu 0281012658 how can i fix immo thanks for helping

Check the key transponder
Check the coil on ignition lock
Program new key

[repair4]

Can i make immo off

[Manta1600]

Can i make immo off

Do you have key from this van or all keys lost?

[repair4]

All keys lost

[lion0304]

All keys lost

Make new key more faster than immo off.

[rapidlocksmiths]

pick decode . cut key and program it in , 10 minute job

[Manta1600]

He have the key - if havent how can see that immo blink

maybe is possible to repair it - change the key coil

[Meat-Head]

maybe is possible to repair it - change the key coil

It’s fkcued, you need a new one.

Any advance on this, feel free

[jodge]

immo off is pain in the ass.
you need emulator and cut the can line. If you need the rpm + temp then you will need to install a switch between the ecu and the dash. Funny job

[avital]

It not true (about cut lines) not for all types emulators cut is needed it is depend of software implemented inside emulator.

[Meat-Head]

Well send a link in your next post

[avital]

Link for Renault the emulator immo with implemented special software : http://www.ecudiag.es/home/2796-emulador-immo-renault-can-250-500-kbps.html

[jodge]

Also is implemented „stealth” software technology - in 99% cases
don't need cut canbus network and do not need to use a relay.

yupp something similar with the italian guys stuff... almost 99% :D i made a few pcs in the last month and 2 of them need to be cutted. maybe it's bad luck or depend on the UCH sw dunno


BTW thx for the useful link

[avital]

Cut wire need ONLY when CANBUS line beyond out the motor controller , further (deeper) in the electrical system is broken like grounded, damage or up to 12v .
If want real deep investigation give logs from CANBUS I teel You what is problem , because I wrote the software for this emulator... :)

[12manux]

Why you don t read eeprom ,find the pin code and program a new key?

[jodge]

bcose the early UCH is a crap. Mostly all of it.