PDA

View Full Version : Iveco Daily 2007 Tacho DTC remove please edc16c39 - 0281012193



thayer201
29th October, 2019, 08:13 PM
hey guys,


removed tacho from iveco daily, connected two yellow plugs as you do sorted cluster out but...


could someone dtc off for me for tacho faults in edc16 and speed limit off.

has no eml and rev above 3000 good - just has dtc.

ecu information

Bosch edc16c39 - 0281012193

MPC562/REVD
C107350W4LCCOV91P17.HEX
E4 M1
1037378086P_315V91

flash M58BW016

Read with fgtech via OBD

fault codes attatched with flash.


many thanks

thayer201

prevozsa
29th October, 2019, 08:30 PM
try and report

thayer201
30th October, 2019, 08:49 AM
try and report

What did you do? Speed limit off and also dtc or just dtc?

thayer201
31st October, 2019, 08:26 PM
hey guys,


removed tacho from iveco daily, connected two yellow plugs as you do sorted cluster out but...


could someone dtc off for me for tacho faults in edc16 and speed limit off.

has no eml and rev above 3000 good - just has dtc.

ecu information

Bosch edc16c39 - 0281012193

MPC562/REVD
C107350W4LCCOV91P17.HEX
E4 M1
1037378086P_315V91

flash M58BW016

Read with fgtech via OBD

fault codes attatched with flash.


many thanks

thayer201

Can anyone else help.. need speed limit off aswell as dtc off..

Above file is dtc only

Many thanks

sonic 1989
31st October, 2019, 10:05 PM
Can anyone else help.. need speed limit off aswell as dtc off..

Above file is dtc only

Many thanks
you have a limit mode 3000 RPM?

thayer201
1st November, 2019, 03:25 PM
you have a limit mode 3000 RPM?

yes i do can you help?

thayer201
3rd November, 2019, 09:11 AM
hey guys,


removed tacho from iveco daily, connected two yellow plugs as you do sorted cluster out but...


could someone dtc off for me for tacho faults in edc16 and speed limit off.

has no eml and rev above 3000 good - just has dtc.

ecu information

Bosch edc16c39 - 0281012193

MPC562/REVD
C107350W4LCCOV91P17.HEX
E4 M1
1037378086P_315V91

flash M58BW016

Read with fgtech via OBD

fault codes attatched with flash.


many thanks

thayer201

Update.... stull having a bit of trouble wuth this one.

I have speed working on cluster , but still no speed or engine speed fault in ECU - goes limp mode.

Is there any other modifications that needs to be done when tacho off...

Bcm any mod needed?

Or can somehelp mod flash from ecu so no limp mode due to speed signal.

Any help please guyy would be great.

Br
Thayer201



SOLVED........

Solved by DTC off and speed limit off
Found speed limit and switched off in edc

I think the problem came with speed sensor signal wiring issues after correcting that dtc off was still not enough.. switch limit off and no problems now.

I do think the best way to do this is to mod bcm eeprom then configuration but thats info ive found here on dk.... i have not tryed it this way.

Br
Thayer201