2016 Crafter EZS problem

[Aislingob]

I change mileage on 2016 VW Crafter using my DP4 , Dash read and wrote perfect , and so did EZS first time , When I putback together I now get yellow flashing light on dashboard and van will not start , plug in and out many times but still not start , DP4 does not allow File restore on EZS , any ideas guys , can Clone ODIS online recode a secondhand EZS ??

[pepi]

Can you read EZS with programmer ?

[Aislingob]

I could read it eith Orange5 , what was your idea ?

[javyb]

I change mileage on 2016 VW Crafter using my DP4 , Dash read and wrote perfect , and so did EZS first time , When I putback together I now get yellow flashing light on dashboard and van will not start , plug in and out many times but still not start , DP4 does not allow File restore on EZS , any ideas guys , can Clone ODIS online recode a secondhand EZS ??Better buy new or code used one. Dp4 will have damaged it

Sent from my SM-N960F using Tapatalk

[honingkoning]

Probably flash damaged, if I remember right all flash are the same for this car,
Try to write good flash and see what happens.

Wbr

[Aislingob]

Is the mileage stored in the flash of the eeprom data

[honingkoning]

Is the mileage stored in the flash of the eeprom dataMilleage is in eep, but flash gets corrupt by reading,

Wbr

[Aislingob]

Numbers on EZS are A 906 900 38 03 and 2E0905843D
The mileage is reading perfect on dash so it must be damaged flash ����

[Aislingob]

If I swam my eeprom dump onto secondhand EZS with exact matching numbers will this fix my problem ??

[honingkoning]

Look for a flash and compare, you are sure soldering all went OK.

Wbr

[Happy786786]

Your ezs flush damaged


Sent from my iPhone using Tapatalk

[Aislingob]

Soldering is perfect , I have checked many times, I can buy second EZS with exact matching numbers, if I read my eeprom dump from damaged EZS and write it to donor EZS will this fix my problem ?

[nikka]

Yes.If eeprom from orginal EZS is ok thiss will fix your problem.But if the org hardware key is ok and eeprom from org key is ok just find flash from same key number and this will be reslove the problem.

[honingkoning]

Soldering is perfect , I have checked many times, I can buy second EZS with exact matching numbers, if I read my eeprom dump from damaged EZS and write it to donor EZS will this fix my problem ?Start with uploading your files,
Start pushing some thanks buttons
Upload your ezs numbers
Maybe some member will upload a good flash.
Write new flash and test.

Good luck

[Aislingob]

I’ll read with Orange5 when I get van from customer , and thanks for all the help guys