View Full Version : EDC16C39 ALFA Lunch Control
naskochipa
2nd November, 2019, 10:36 PM
Can anyone help with Lunch Control For this car at 2800rpm
naskochipa
3rd November, 2019, 09:20 PM
Someone help thanks in advance
naskochipa
4th November, 2019, 08:04 AM
Nobody can do it
a500tut
4th November, 2019, 11:04 AM
I can do this.
Johnwick88
4th November, 2019, 12:12 PM
I can do this.So do it. Why you write I can do it? If don't do it.
DiegoStud
4th November, 2019, 01:58 PM
If you are not having any success with gear limiters I suppose the official way to alter "drive determination during take off" it is attached if it helps.
1C15FC (32 bit) is AccPed_dtDriveAway_C. Factor- 0.015259. You made need to increase this to transition faster to normal torque request map.
1C1614 (8 bit) is AccPed_numGearDrvAwayStop_C. Gearbox status (gear number) to activate transition to STOPPING state in DriveAway state machine. Here is where the SW version differs slightly. If it doesn't work in successive attempts unless engine is switched off, this may need setting to 1 or 0. See what happens first.
1C1615 (8 bit) is AccPed_numGearDrvAwayStrt_C. Gearbox status (gear number) to activate transition to STARTING state in DriveAway state machine
1C1AFC is AccPed_trqEngDriveAway_MAP. Alter RPM axis with the old 20rpm step gap. Zero torque above 2800rpm.
1C2186 is AccPed_vDriveAwayHigh_C. km/h 0.01.
1C2188 is AccPed_vDriveAwayLow_C.
Might work. Wouldn't do any harm to try.
naskochipa
4th November, 2019, 02:50 PM
So do it. Why you write I can do it? If don't do it.
I asked him what he wanted to do but stopped answering me
naskochipa
4th November, 2019, 02:53 PM
I can do this.
Here's what you want to do here, too
Johnwick88
4th November, 2019, 04:06 PM
Can anyone help with Lunch Control For this car at 2800rpm
Here your file send report i did it in speed mode lol pass in PM .
Johnwick88
4th November, 2019, 05:12 PM
I asked him what he wanted to do but stopped answering meProbably he looking for customers here.
naskochipa
4th November, 2019, 09:38 PM
Probably he looking for customers here.
Unfortunately
AVDigitale
4th November, 2019, 09:45 PM
i can make with hard rev limit to 2800rpm like petrol car ,if you need :)
naskochipa
5th November, 2019, 10:07 AM
i can make with hard rev limit to 2800rpm like petrol car ,if you need :)
Can you do
naskochipa
5th November, 2019, 06:02 PM
i can make with hard rev limit to 2800rpm like petrol car ,if you need :)
This guy wants money from me I told him this could not be done I tell you to be careful
Johnwick88
5th November, 2019, 10:51 PM
This guy wants money from me I told him this could not be done I tell you to be careful
Try this one same pass and free version lol
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.