Fiat idea 1.3 jtd full bdm or mpc needed

[alladdin205]

Hi to all!
Please help with full bdm on fiat idea 1.3 jtd, year 2004.
I've tried to read it with ktag and gives checksum error. I've instaled c++2005 and framework and error still appear. I'm thinking is an ecu problem. The eeprom reads ok but on MPC I have checksum error. Evem the mpc will be helpfull.
Ecu info in picture attached.
Thanks!https://uploads.tapatalk-cdn.com/20191113/90b21ce53ce95746856eb1fcd44e8819.jpg

Sent from my S90_Apex using Tapatalk

[begi1]

Hi to all!
Please help with full bdm on fiat idea 1.3 jtd, year 2004.
I've tried to read it with ktag and gives checksum error. I've instaled c++2005 and framework and error still appear. I'm thinking is an ecu problem. The eeprom reads ok but on MPC I have checksum error. Evem the mpc will be helpfull.
Ecu info in picture attached.
Thanks!https://uploads.tapatalk-cdn.com/20191113/90b21ce53ce95746856eb1fcd44e8819.jpg

Sent from my S90_Apex using Tapatalk

Hello, I have this, if can help you.

[alladdin205]

It is readed by BDM?

Sent from my S90_Apex using Tapatalk

[alladdin205]

Ktag sais wrong file.
Even eeprom file will be helpful for this ecu, if enybody can provide it. The original file is corupt soo I need a good one from another ecu. Hope can someone can provide eeprom file from this ecu.

Sent from my S90_Apex using Tapatalk

[alladdin205]

After a long search...I've writed virgin eeprom and immo off flash with kess by OBD and car started with no problem. Learned the remote with skp, in scrap bsi.

Sent from my S90_Apex using Tapatalk