View Full Version : Dpf off punto evo mj8df
diagoto44
17th November, 2019, 09:57 AM
Hi friend,
I tested a file to dpfoff my vehicle but it does not work.
I have no fault my engine calculator but I have a light particle filter
I filed the original file and dpf as an attachment
Thanks
AVDigitale
17th November, 2019, 10:03 AM
you need first to reset dpf with diagnostic and oil service then flash your mod file
daniteixeira
17th November, 2019, 12:40 PM
yes. you need reset dpf to 0% and after remove dpf
diagoto44
17th November, 2019, 02:27 PM
yes. you need reset dpf to 0% and after remove dpf
I made a reset with delphi and I still have fap
Johnwick88
17th November, 2019, 02:44 PM
I made a reset with delphi and I still have fap
Try this and report
diagoto44
17th November, 2019, 08:37 PM
pass, please ?
Johnwick88
17th November, 2019, 09:15 PM
pass, please ?
I sent right now.
B. Regards
diagoto44
17th November, 2019, 10:30 PM
I sent right now.
B. Regards
Thanks, but always the same, I have a fap light
Johnwick88
17th November, 2019, 10:34 PM
Thanks, but always the same, I have a fap lightTomorrow Read code error and tell me.
diagoto44
17th November, 2019, 10:46 PM
Tomorrow Read code error and tell me.
I have no fault in the engine calculator,
thanks for your help
rfernandes
17th November, 2019, 11:42 PM
what kind of program do you use to do dpf?or do it manual?
daniteixeira
18th November, 2019, 01:14 AM
write ori file of car and check the dtc's
Johnwick88
18th November, 2019, 06:46 AM
Yes put ori file and read code error
diagoto44
18th November, 2019, 11:02 PM
Hello,
By putting the original file, I still have no default in ecu motor
but I have a fap light. I reset the fap with delphi ds150e. Tomorrow I will try to do a regeneration for can be remove this indicator fap.
carbyvw
18th November, 2019, 11:50 PM
hi
you can`t do it regeneration without dpf,the process will be stop after few min.because dif. pressure to low.
diagoto44
19th November, 2019, 12:57 AM
hi
you can`t do it regeneration without dpf,the process will be stop after few min.because dif. pressure to low.
how to remove this dpf light?
diagoto44
20th November, 2019, 08:15 PM
Hello,
I put the original program. I managed to remove the fap light by doing a regeneration.
I did a reading of the calculator.
but, I do not understand the dump is the same before regeneration (with fap light)
I tested by putting the dpfoff file. The fap light goes on.
I enclose the file after reset fap
carbyvw
21st November, 2019, 01:10 AM
fap light come from eprom, not from flash
diagoto44
21st November, 2019, 08:26 PM
fap light come from eprom, not from flash
the problem is solved.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.