PDA

View Full Version : Ford Transit DPF+EGR OFF



Centry
17th November, 2019, 05:11 PM
Hi, can anybody please help turn DPF and EGR OFF for my Ford Transit 2010 2.2 TDCi 85kW? I will appreciate it, please.

Visteon DCU 102
HW: 8C11-12A650-LE
SW: 8C11-12K532-ALE
Spare: CGS-ST10F276
Engine:
HW Ver.: 8C11-12B684-FB
SW upg.: 8C11-12A650-LE

naskochipa
17th November, 2019, 05:24 PM
Hi, can anybody please help turn DPF and EGR OFF for my Ford Transit 2010 2.2 TDCi 85kW? I will appreciate it, please.

Visteon DCU 102
HW: 8C11-12A650-LE
SW: 8C11-12K532-ALE
Spare: CGS-ST10F276
Engine:
HW Ver.: 8C11-12B684-FB
SW upg.: 8C11-12A650-LE

Thancks And Reputation

Test And Report

Pass- PM

Centry
18th November, 2019, 04:46 PM
Thank you for that. Succesfully I wrote it to my ECU, and the car works, but after 13km I had gear light up, and after some time it disappeared and then only Check Engine light came up. And when Check Engine or gear light is on, the vehicle doesn't drive fast cuz it is in service mode. All my DPF and EGR sensors are connected, because when I disconnected DPF sensors there came 2 codes, so I just connected it back. And the code from Check Engine is:
P2002 - Particulate Trap Efficiency Below Threshold (Bank 1)

Maybe somebody could DTC disable that fault code, and maybe all particulate fault codes disable?

Centry
18th November, 2019, 08:21 PM
Please help block fault code P2002. I can't do it with MTX DTC Remover, it doesn't have Visteon DCU102 on it.

Rar password: 1234
Made by: naskochipa

Centry
19th November, 2019, 12:21 PM
Bump.
Somebody please help. Remove Dtc from modified file or try to remove dpf and egr without fault codes. :( stupid Ford Visteon ECU.