valenmanza
18th November, 2019, 11:41 PM
Hello good, I am trying to make a copy of my chip 29f010b from 1ap.40 106 1.4i 75cv
Read with GQ-4X4 and plcc32 to dip 32 adapter.
I select the device am29f010 with plcc32 in gq programmer and read 128kb file, copy file to a new eprom and the vehicle does not start ...
All the original files that I find are 64 kb.
In theory this ecu should carry 28f512 64kb, but having 29f010b the file is 128kb.
That may be the problem.
If I read the original as if it were a 28f512 can I spoil the original file?
Hello good, I am trying to make a copy of my chip 29f010b from 1ap.40 106 1.4i 75cvRead with GQ-4X4 and plcc32 to dip 32 adapter.I select the device am29f010 with plcc32 in gq programmer and read 128kb file, copy file to a new eprom and the vehicle does not start ...
Read with GQ-4X4 and plcc32 to dip 32 adapter.
I select the device am29f010 with plcc32 in gq programmer and read 128kb file, copy file to a new eprom and the vehicle does not start ...
All the original files that I find are 64 kb.
In theory this ecu should carry 28f512 64kb, but having 29f010b the file is 128kb.
That may be the problem.
If I read the original as if it were a 28f512 can I spoil the original file?
Hello good, I am trying to make a copy of my chip 29f010b from 1ap.40 106 1.4i 75cvRead with GQ-4X4 and plcc32 to dip 32 adapter.I select the device am29f010 with plcc32 in gq programmer and read 128kb file, copy file to a new eprom and the vehicle does not start ...