Citroen C5 2015 bsi JC where is mileage located ?

[credoline]

Hi friends. I have here Citroen C5 2015 year with Jonson Controls bsi BSI04EV2. Inside bsi i am found SPC560B60L7 and one 8 pin smd IC on what write 128. I am try to read this 8pins IC as 95128 or 25128 with Beeprog but always get message that pins 3 and 7 have no contact. I need info where is located mileage?
Thank you

[jomberykaso]

95128........

[credoline]

It is this chip what write on him 128 eepropm 95128?
Or some another chip?
How to read him?
Need to select him somehow in programmer software? Or how?
Thank you

[jomberykaso]

post pictures mate, i dont understand your problem, it's just a simple eeprom....maybe you need to check contacts or use other programmer to read that eeprom

[credoline]

Picture attached

[jomberykaso]

put a complete picture please, im trying to find eeprom you need to read

[credoline]

Complete picture

[credoline]

And? You do not have answere where is eeprom if any?

[jomberykaso]

I don't have that kind of problem when I edit mileage mate

[credoline]

What problem you do not have?
Do find the eeprom?
Or you do mileage with DP4 via OBD2 in BSI?

[jomberykaso]

1.I don't have problem to find eeprom.
2. I never edit a bsi by obd2....I am not stupid to do that.
3. I have my own calculators for etsmart software.

[aiboLV]

Clean carefully this eeporom.I have always problems with bsi from french cars,when i not clean enough ic legs.

[credoline]

Yes, i know all that. From beggining of this thread i am ask for simply answere. What eeprom i have here and where is located on my picture! And i am give all data what i can give, picture and numbers from chip i think is eeprom. This IC have pin 4 on GND and pin 8 is possible on Vdd, on that way is connected on board. Pins 5 and 6 going to SPC560. All this tell me that this IC is eeprom, but i can not read him as 25128 or 95128 or 24128. So, i need that someone tell me: Yes, i am read this chip as XXXXX with programmer XXXXX. That is all what i am asking from beggining of this thread.
Thank you

[Cllau]

Hi friends. I have here Citroen C5 2015 year with Jonson Controls bsi BSI04EV2. Inside bsi i am found SPC560B60L7 and one 8 pin smd IC on what write 128. I am try to read this 8pins IC as 95128 or 25128 with Beeprog but always get message that pins 3 and 7 have no contact. I need info where is located mileage?
Thank you

128 is 95128 for a clean read better remove the chip......:captain:

[jomberykaso]

BSI :eeprom h128, eeprom 25128, eeprom 25c128 are = 95128 as i told you in post #2

DASH : 93c76 x 16 bits

[credoline]

I am succed to read eeprom in bsi as 95128 when i disable checking of pins. File attached. Ori mileage is around 251548km and i need 179340km. Second file is with history erased, i hope its okay.
Thank you

[Cllau]

try this...:wink:

[credoline]

It work. But i do not succed to write original eprom. I am try as 95128 and as 25128 with different manafacturers but not work. At the end i am use another eeprom 95128 program and solder back in bsi and tested in car.
Thank you

[Cllau]

you're welcome m8..:wink: