Nissan Almera

[Mezz_cro]

Hello

I have Nissan Almera 1.5 gasoline 2001.year and i try to do immo off but without success,anyone have advice or expirience how to solve this problem ?

Ecu is Hitachi MEC20-600-B1 with eeprom 95C56.

I put Julia emulator and do everything by manual,but car won t start and inside ECU i have DTC : P1610 LOCK MODE

Anyone have advice or can help me to solve this problem ?

Thank you ...

Regards

[avital]

This emulator that you set up for ECU is a toy for amateurs, in case of lock mode you need an emulator with full support of the NATS5 protocol.
In a real NATS5 emulator is implemented support for ALL diagnostic commands and you add an emulator for example by x431 launch diagnostic device -> through the procedure - add a key (PIN code I set in emulator ... so you know this number from me) ,of course at the same time you exit the lock mode error :)

[Mezz_cro]

This emulator that you set up for ECU is a toy for amateurs, in case of lock mode you need an emulator with full support of the NATS5 protocol.
In a real NATS5 emulator is implemented support for ALL diagnostic commands and you add an emulator for example by x431 launch diagnostic device -> through the procedure - add a key (PIN code I set in emulator ... so you know this number from me) ,of course at the same time you exit the lock mode error :)

Then which emulator you suggest me for NATS5 protocol ?
I have launch diagnostic....

Regards

[avital]

Then which emulator you suggest me for NATS5 protocol ?
I have launch diagnostic....

Regards

Before buy , contact to seller , they help You how check if in ECU MEC is not damage line for immo communication (It is some time problem this family)

669117

http://www.ecudiag.es/home/2838-emulador-immo-nissan-nats5-k-line.html

[Mezz_cro]

Hello

I order this emulator and i get it and put in the car,but now have problem security code won t accept 5523 that i can program emulator.

I try with Launch and AVDI,same situation,anyone have advice or can help me about this situation ?

Thank you ...

Regards