Help Audi S3 1.8T

[pacomasi]

Hi, help disable sensor EGT G235, Audi 8L S3 1.8t motor AMK.

Thankyou.

[naach]

Hi, help disable sensor EGT G235, Audi 8L S3 1.8t motor AMK.

Thankyou.I can do this job. Give me this weekend of time and I'll do it for you.

Enviado desde mi Redmi Note 7 mediante Tapatalk

[pacomasi]

thanks i can wait :peaceful:

[naach]

Hola amigo, aquí está tu archivo como lo prometí, has elevado el rendimiento de EGT hasta 1270º, pero realmente no sé si necesitas desactivar cualquier error dtc, por favor presiona reputación y gracias. Pase PM

[icezero2010]

Hola amigo, aquí está tu archivo como lo prometí, has elevado el rendimiento de EGT hasta 1270º, pero realmente no sé si necesitas desactivar cualquier error dtc, por favor presiona reputación y gracias. Pase PM

there is some more to do in amk bam as tabgbts

i´m sure your lambda is now extrem fat without egt sensor

[naach]

there is some more to do in amk bam as tabgbts

i´m sure your lambda is now extrem fat without egt sensorThis Is original information oficial egt sensorhttps://uploads.tapatalk-cdn.com/20191124/6607f739cdfae6c75b6fb0a7635a1254.jpg

Enviado desde mi Redmi Note 7 mediante Tapatalk

[icezero2010]

This Is original information oficial egt sensorhttps://uploads.tapatalk-cdn.com/20191124/6607f739cdfae6c75b6fb0a7635a1254.jpg

Enviado desde mi Redmi Note 7 mediante Tapatalk

yes but on s4 you have no enrichment with a damage sensor there is the faktor 1

on 1.8t u have a extreme fat afr without sensor ;-)

becouse u have a delta for emergency egt sensor

[naach]

yes but on s4 you have no enrichment with a damage sensor there is the faktor 1

on 1.8t u have a extreme fat afr without sensor ;-)

becouse u have a delta for emergency egt sensorso. Really. what would be the ideal way to cancel the egt probe. I am not in favor of nulling measurement sensors. let's really keep in mind that me7. even without physical egt sensor. she calculates one egt per lambda for enrichment by kflbts or kkflbts I think I remember. We also overlook something. What is the reason for the need to cancel said measurement probe? We are here to contribute and learn. so it is clear that all opinions are good. taking into account that this probe, I think, cannot be overridden in the bit pairs. or also called eskonf

Enviado desde mi Redmi Note 7 mediante Tapatalk

[icezero2010]

so. Really. what would be the ideal way to cancel the egt probe. I am not in favor of nulling measurement sensors. let's really keep in mind that me7. even without physical egt sensor. she calculates one egt per lambda for enrichment by kflbts or kkflbts I think I remember. We also overlook something. What is the reason for the need to cancel said measurement probe? We are here to contribute and learn. so it is clear that all opinions are good. taking into account that this probe, I think, cannot be overridden in the bit pairs. or also called eskonf

Enviado desde mi Redmi Note 7 mediante Tapatalk

the simple way is to set DLATRNLN to zero

[naach]

the simple way is to set DLATRNLN to zero
Would this be the right way?

[icezero2010]

Would this be the right way?

yes and now u must mod all other temp or switch same as s4

[naach]

yes and now u must mod all other temp or switch same as s4you could do it? That way I will see comparing the archives to know the correct way to do it. Thanks for the help. As we say in Spain. You will never go to bed without knowing something new!

Enviado desde mi Redmi Note 7 mediante Tapatalk

[pacomasi]

is there someone to help me disable the EGT sensor??

[Lambda1]

icezero told you solution above...

[pacomasi]

the simple way is to set DLATRNLN to zero
then you just have to modify from DLATRNLN to zero?


and it is already disable the sensor?

[Lambda1]

and if you done... see post 11 ...