PDA

View Full Version : zafira b 2012 need pin from dash dump



kryspl
22nd November, 2019, 07:58 PM
Hello! Can someone try to get out pin from dump please?

thanks in advance!

kizagt
22nd November, 2019, 08:34 PM
Hello! Can someone try to get out pin from dump please?

thanks in advance!

try code 6704

kryspl
22nd November, 2019, 08:37 PM
Car is away. Is there a chance to try it connecting instument cluater on bench? (I hav just cluster with me)
Ps geniuine millage is 101000 miles or 161000kms if thats help

lucic66
22nd November, 2019, 08:54 PM
Hy,wat model its car,Zafira B or C,wat eeprom have
Car is away. Is there a chance to try it connecting instument cluater on bench? (I hav just cluster with me)
Ps geniuine millage is 101000 miles or 161000kms if thats help

kryspl
22nd November, 2019, 09:26 PM
It is zafira B 1.7 2012y vin: W0L0AHM75D2004956

lucic66
22nd November, 2019, 09:28 PM
Have in cluster,one o80dowq eep?
It is zafira B 1.7 2012y vin: W0L0AHM75D2004956

kryspl
22nd November, 2019, 09:34 PM
Yes thats the one

lucic66
22nd November, 2019, 09:35 PM
You desolder eep,and read?
Yes thats the one

kryspl
22nd November, 2019, 09:51 PM
Nope just read it on board. Dump is good because can see vin no and a correct mileage... Only immo sercoce tool shows up "bad dump"

Bdw code 6704 is wrong

Stopro92
22nd November, 2019, 09:57 PM
Try code 7640, 0802 or 8020

lucic66
22nd November, 2019, 09:57 PM
Try 0071,no work must read again,desolder.
Nope just read it on board. Dump is good because can see vin no and a correct mileage... Only immo sercoce tool shows up "bad dump"

Bdw code 6704 is wrong

Johnner
22nd November, 2019, 10:12 PM
Nope just read it on board. Dump is good because can see vin no and a correct mileage... Only immo sercoce tool shows up "bad dump"

Bdw code 6704 is wrong

Not sure you're correct mate....I can see a 3x byte difference in that dump......top line should be the mileage,from $00-$0f,and your VIN should be 17x bytes long,from $150-$160

Both are short 3x bytes.....so pin number is more than likely going to be out also ? :dontknow:

brend
22nd November, 2019, 10:37 PM
I think dump bad or samething wrong with bit, vin location in hex adress is wrong 100%.
Desolder and read 16 bit!

kryspl
22nd November, 2019, 11:37 PM
thanks for all replys. unfortunatly I left IC in car and cam back to home now but found old faulty UEC omdule and read it. I add dump to first post. It should help

thanks again

Johnner
22nd November, 2019, 11:48 PM
From that UEC file,the pin is 6704

kryspl
23rd November, 2019, 01:08 PM
6704 is accepted by ic but not by uec and other modules. All comes from same car...