Audi GAMMA II

[Brainticket]

Hello !

I need a code for this Radio:

AUDI GAMMA II (Blaupunkt)
7 646 857 080
893 035 186

V0 549 398

Greets !

[dvb_gsm]

Hi..

send a picture of the label

[Brainticket]

Hello !
Here is the Image

670391
670393

Greets

[Rafikvw]

upload a photo from inside the radio

[catalinosonesti]

hy,for your radio must read this mcu :MC68HC05B6
МС68НС05В6 for get code to your radio
wbr

[Rafikvw]

well I could argue MC68HC05B6 because it's probably a hybrid

[Rafikvw]

I think it's a 100% ceramic hybrid, do it like this: Pin 19 of the processor (clock bus) short through the resistor from 180 to 470 ohm to ground and turn on the radio, then open.
The radio will start without a code.
Press M + VF and when "CodE" appears, insert the new code you just invented

[Brainticket]

upload a photo from inside the radio

670432

Here a photo from inside

[Brainticket]

I think it's a 100% ceramic hybrid, do it like this: Pin 19 of the processor (clock bus) short through the resistor from 180 to 470 ohm to ground and turn on the radio, then open.
The radio will start without a code.
Press M + VF and when "CodE" appears, insert the new code you just invented

oh - that was a great tip :peaceful: - used a 300 ohm resistor - and after 3 tries i could enter the new code - very nice !!

thanks very much !!

:)

[dvb_gsm]

Hi..

Simple solution with code off

[strzyzol]

I made this processing but I still have a safe

[hifichip]

Can the radio be unlocked when the display shows 6 SAFE?

[SergeyS]

Thanks a lot for the good advice. Not the first time, but it turned out to enter the code. R=240 ohm.