BMW E70 EGS CAS3+ sync help need

[arthoor0]

Hello. Have BMW E70 with encripted CAS3++. I need help extract isn from EGS ram dump and put in new CAS3++ dump.
I will accept any offer. Thanks.

[brend]

Do not remember like from the transmission isn you can pull to dump!
Only obd2 away or from cas which pair with this tcm.

[arthoor0]

Do not remember like from the transmission isn you can pull to dump!
Only obd2 away or from cas which pair with this tcm.

It is possible. There are people who can do this.

[tech_cz]

Of course it is possible.
For example:

http://www dot cartools dot lv/Robin/page10.html

WBR, Marek

[brend]

Link not work.


Of course it is possible.
For example:

http://www dot cartools dot lv/Robin/page10.html

WBR, Marek

[kiszka]

Link not work.
http://www.cartools.lv/Robin/page10.html

(http://www.cartools.lv/Robin/page10.html)on this site, this is the best


STEP5 –

press button “Read memory” and wait until memory read finished. Save memory and send us a file. Take attention that memory reading can take a lot of time (up to some hours), so good power supply is mandatory.



DISCLAIMER:
1. Only thing we guarantee is that ISN calculated by us is correct. No any refunds in case if EGS has internal faults or is damaged by incorrect unblocking.
2. In case if you are not able to unblock EGS by yourself it is possible to send MECHATRONIC unit to us. Any shipment costs are covered by customer.

[macako6]

Hello. Have BMW E70 with encripted CAS3++. I need help extract isn from EGS ram dump and put in new CAS3++ dump.
I will accept any offer. Thanks.


Read it with the BDM100 and send dump


https://www.youtube.com/watch?v=BBNcbCrH0D8


if you have the right tool you can read it on the table (pin output EGS)

https://www.facebook.com/maxchip/videos/10215419271580535/?t=1