View Full Version : help for enabel fault p160a vw tiguan med17.5.5
bali motor
29th November, 2019, 01:15 PM
hello
need help for disable fauly p160a ecu med17.5.5
thank you
immokill
29th November, 2019, 02:31 PM
can you send VAG code?
immokill
29th November, 2019, 02:40 PM
no cheksym calc ,try
icezero2010
29th November, 2019, 02:43 PM
can you send VAG code?
p160a is checksum error i think he has done immo off in flash
or wrong mod
bali motor
29th November, 2019, 02:48 PM
no cheksym calc ,try
thank you
i will try
bali motor
29th November, 2019, 02:58 PM
first times i am make immo off. cart start and have 2 fault in engine and in immobilzer have 1 fault :
1) control module fauly
2) ecu disable
and in dash show immo active
now i am make immo on normal.
but in ecu come 1 fault : control module fauly
all normal.. no any fault in immobilizer
bali motor
29th November, 2019, 03:19 PM
no cheksym calc ,try
solved thank you immokill
immokill
30th November, 2019, 01:31 PM
no problem glad I helped
regards
matthabdel34
2nd January, 2022, 01:01 PM
hi all, unresolved problem, I can not remove error immo and auto hold. the car is working fine but I have two lights on. Thanks for your help
matthabdel34
2nd January, 2022, 01:12 PM
hi all, unresolved problem, I can not remove error immo and auto hold. the car is working fine but I have two lights on. Thanks for your help
hesham10
9th April, 2022, 08:14 PM
also i need this p160a .... took full bdm of ecu and wrote on another ... didn't clone only immo data
immokill
10th April, 2022, 02:31 PM
What tool You use to read and write mate?
hesham10
13th April, 2022, 01:50 AM
Fc200 first time to read with it this ecu ... also readed with ktag ... and compared ... flash is the same ... eep on fc200 looks smaller
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.