PDA

View Full Version : help for enabel fault p160a vw tiguan med17.5.5



bali motor
29th November, 2019, 01:15 PM
hello
need help for disable fauly p160a ecu med17.5.5
thank you

immokill
29th November, 2019, 02:31 PM
can you send VAG code?

immokill
29th November, 2019, 02:40 PM
no cheksym calc ,try

icezero2010
29th November, 2019, 02:43 PM
can you send VAG code?

p160a is checksum error i think he has done immo off in flash

or wrong mod

bali motor
29th November, 2019, 02:48 PM
no cheksym calc ,try
thank you
i will try

bali motor
29th November, 2019, 02:58 PM
first times i am make immo off. cart start and have 2 fault in engine and in immobilzer have 1 fault :
1) control module fauly
2) ecu disable

and in dash show immo active

now i am make immo on normal.
but in ecu come 1 fault : control module fauly

all normal.. no any fault in immobilizer

bali motor
29th November, 2019, 03:19 PM
no cheksym calc ,try


solved thank you immokill

immokill
30th November, 2019, 01:31 PM
no problem glad I helped

regards

matthabdel34
2nd January, 2022, 01:01 PM
hi all, unresolved problem, I can not remove error immo and auto hold. the car is working fine but I have two lights on. Thanks for your help

matthabdel34
2nd January, 2022, 01:12 PM
hi all, unresolved problem, I can not remove error immo and auto hold. the car is working fine but I have two lights on. Thanks for your help

hesham10
9th April, 2022, 08:14 PM
also i need this p160a .... took full bdm of ecu and wrote on another ... didn't clone only immo data

immokill
10th April, 2022, 02:31 PM
What tool You use to read and write mate?

hesham10
13th April, 2022, 01:50 AM
Fc200 first time to read with it this ecu ... also readed with ktag ... and compared ... flash is the same ... eep on fc200 looks smaller