kennyash1
3rd December, 2019, 04:22 PM
is it possible to delete the swirl flaps from this engine... not delete the fault code rather stop the swirl flaps from working? the motor is still connected and even though I have removed dtcs the flaps still open and close... is it possible to map them out so motor is no longer working??
I have 3x swirl flaps glued however 3rd one is conencted directly to motor and worked glue loose
thanks
HW: 0281012247
SW: 1037372565
VIN nr.: YS3FF46W961014678
SW ver.:
Spare:
Engine: Z19DTH
HW Ver.:
SW upg.:
Installation:
I have 3x swirl flaps glued however 3rd one is conencted directly to motor and worked glue loose
thanks
HW: 0281012247
SW: 1037372565
VIN nr.: YS3FF46W961014678
SW ver.:
Spare:
Engine: Z19DTH
HW Ver.:
SW upg.:
Installation: