View Full Version : Opel Vectra B X16XEL Immo OFF
BadeaCristian
6th December, 2019, 09:45 PM
Hello there,
I got an Opel Vectra B witch is not starting.
As i check i observed that the owner does not have the Transponder into the key.
Is there any way to make immo off since the owner does not have the transponder anymore?
Part Number: 16202319
Aplha COde : NL
Ecu TYpe: X16XEL
Thanks!
samehlila
8th December, 2019, 04:27 AM
No immo off for such ecu
Read tms ic in immo around ignition key
Extract pin code and code new transponder id 40 via obd
Or from dump via tango or tm100
kowal5
8th December, 2019, 08:14 AM
you can do immo off in this ECU. You have the pattern in the attachment. You must disconnect immobox. Dont forget click thanks and reputations.
BadeaCristian
8th December, 2019, 10:10 PM
you can do immo off in this ECU. You have the pattern in the attachment. You must disconnect immobox. Dont forget click thanks and reputations.
can't download it.
can you upload it again?
BadeaCristian
8th December, 2019, 10:11 PM
No immo off for such ecu
Read tms ic in immo around ignition key
Extract pin code and code new transponder id 40 via obd
Or from dump via tango or tm100
Do i need a new transponder id40 or i can program an used one?
dantetimoc
9th December, 2019, 07:23 AM
you need a new id40 transponder or precode one pcf7935 to id40 with zedbull ...
car00ly
15th October, 2021, 11:34 AM
i have same ecu anyone to help me immo off?
Part Number: 16202319
Aplha COde : NL
Ecu TYpe: X16XEL
rafal
15th October, 2021, 12:18 PM
i have same ecu anyone to help me immo off?
Part Number: 16202319
Aplha COde : NL
Ecu TYpe: X16XEL
Read again whole thread carefully.....then come back
volodin69
15th October, 2021, 01:27 PM
Do i need a new transponder id40 or i can program an used one?
Carprog can read this hsfi-c code by obd. No need to read TMS.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.