PDA

View Full Version : Ford Figo IMMO help



BraLaas
12th December, 2019, 09:17 PM
Good Day

i have an ford figo, Complaintis that car wont turn over and immo light is blinking
made new key using tango ( ECU 93C86 ) no luck. 4D63 TP
i checked if coil is communicating with TP using VVDI mini key tool an Signal recieved is 4D tp.
checked fault codes IPC lost Communication, Resoldered pulgconnector area and MCU and NXP CAN BUS transiever IC's
still no Luck...

Must the cluster and ECU be married for this Immo as Key data are retrieved from ECU.
any help will be much appreciated!
thank you.

Meat-Head
12th December, 2019, 09:28 PM
ON TOPIC :-


No idea on that model

1) check if transponder loop soldered or just pins through the board
2) where the wires connect to transponder loop, try sokdering them
3) leave ignition on for 1 hour with battery charger