2000 Ford F150 mileage

[Marios80]

I have a 2000 F150 cluster that i need to change miles on. I will be using a digiprog clone. I know the processor is HC11 and I will need to use digiprog plug #35. Need to see what points to hook up to the digiprog plug. The manual i have is very blurry and i can't tell where to connect to. If you can also let me know what the colors are so i can make sure the clone one's are matched up correctly. I'd appreciate a cluster pin out also so i can power it up for bench testing.

[jomberykaso]

https://www.digital-kaos.co.uk/forums/showthread.php/733977-F150-2008-mileage-correction-digiprog?highlight=Ford+F150+hc11 (https://www.digital-kaos.co.uk/forums/showthread.php/733977-F150-2008-mileage-correction-digiprog?highlight=Ford+F150+hc11)

https://www.digital-kaos.co.uk/forums/showthread.php/459878-Ford-f150-2001-pinout-cluster?highlight=Ford+F150+hc11

https://www.digital-kaos.co.uk/forums/showthread.php/685134-2003-Ford-F150-3E22B-mask-68HC11E20-trouble-reading?highlight=Ford+F150+hc11



(https://www.digital-kaos.co.uk/forums/showthread.php/685134-2003-Ford-F150-3E22B-mask-68HC11E20-trouble-reading?highlight=Ford+F150+hc11)

[clusters]

Never work, send it back to the customer.

Digi clone won't do any hc11.

[clusters]

Since you are new to Digiprog, I suggest you go and read this whole thread, yes all 170 pages of it lol

Anything you ever wanted to know is in it.

https://www.digital-kaos.co.uk/forums/showthread.php/282850-Digiprog-3-clone-questions-and-answers

[jomberykaso]

...........lol............

[Marios80]

Since you are new to Digiprog, I suggest you go and read this whole thread, yes all 170 pages of it lol

Anything you ever wanted to know is in it.

https://www.digital-kaos.co.uk/forums/showthread.php/282850-Digiprog-3-clone-questions-and-answers


Have no problem going through 170 pages, thanks.

[Marios80]

If digiprog won't work will a carprog clone work?

[Killer76]

Yes......At least for me it does....

[Marios80]

Yes......At least for me it does....



which cable are you using and do you have the diagram for the this cluster with carprog?

[Killer76]

A10 cable

What you need is in the manual. I suggest you try to figure this to out on your own. It will do you some good. If your gonna do this stuff you need to learn. We all need help from time to time but not every job.

If you cant figure it out let us know.

[Marios80]

A10 cable

What you need is in the manual. I suggest you try to figure this to out on your own. It will do you some good. If your gonna do this stuff you need to learn. We all need help from time to time but not every job.

If you cant figure it out let us know.


i understand and I wish I had the manual but I didn't get it when I purchased the unit. If you can provide me with a link to the manual or where I can get it then I can figure it out from there.

[Killer76]

I added it to my previous post.

[Marios80]

I added it to my previous post.


Awesome! Thank you. I will work on it. Can I find all carprog manuals online? Or do you have a copy?

[Killer76]

Should be included with your tool.

Open Carprog, Choose the MCU your reading , look at bottom left of page. You should see a manual tab.

[jomberykaso]

Awesome! Thank you. I will work on it. Can I find all carprog manuals online? Or do you have a copy?


Check your Inbox notifications for pass

https://www.mediafire.com/file/qn75phhms84gsi1/Carprog_pdfs.rar/file

[Marios80]

Should be included with your tool.

Open Carprog, Choose the MCU your reading , look at bottom left of page. You should see a manual tab.



Should be included with your tool.

Open Carprog, Choose the MCU your reading , look at bottom left of page. You should see a manual tab.


Thank you to both

[Marios80]

Finally got time to mess with the carprog and the HC11 manuals. So for reference the masket set on the processor is E22B. Got most of the colors and points worked out but I need to figure out the PD0/RxD (Green) and PD1/TxD (yellow). Those colors are based on the carprog HC11 manual but when I look at the pinouts on Codecard the diagram says that Yellow is RX (pin 13) and Green is TX (pin 14). Seems the colors on codecard are switched. Should I go by the colors on the carprog manual or by the pic on Codecard?

[jomberykaso]

Colors are colors only. Check signal continuity in your adapter according to codecard info. ...this is the important thing

[Marios80]

I get the whole continuity thing but that still wouldn't tell me which pin is RX and which is TX.

[jomberykaso]

TX : pin 14
RX: pin 13

I can't understand why you don't see this if you already have all pdf manuals of carprog....even with pictures, names and colors

[Marios80]

TX : pin 14
RX: pin 13

I can't understand why you don't see this if you already have all pdf manuals of carprog....even with pictures, names and colors


I can see the manuals, pictures, names and colors but that was my confusion and why I posted my question. My post asked if I should go by the carprog manual or the the carprog pin pic from Codecard. The manual didn't tell me which pin TX or RX is and the colors were different than on Codecard. By your response you answered my question. I should use the the pic of codecard. That's all you had to say.....

[mrkyboy]

If yu have problem with reading disconnect red wire on A10 cable and plag in external +5v.I had that problem

[Killer76]

This works for me....

[Fordtrucktexan]

Can you inbox me pass

[mikroel]

Because "Carprog Colors" I designed my adapters three years ago,
Now color doesn't matter, it's very easy to use.


I see that some guys have started copying my design,few months ago,and make advertising on the forum, ....

in any case a good adapter means a successful business.




https://youtu.be/eg8lUVKdkyY