PDA

View Full Version : Renault Kangoo Sirius 32N - need immo off



lucianh
16th December, 2019, 08:33 PM
Hello!


Need your help again :chuncky:


I have a Renault Kangoo 1.4 with an automatic gearbox, with air condition. The ecu is a Siemens Sirius32 - 8200109025, S110110016, it has the CAN transducer on the board - A82C250.


Need a good solution for immo off because it starts randomly and the car it's a bit far from me. Tried solutions with a program but without succes.


Attached the flash, it has been read in boot mode.


Thank you in advance!



it's a bit far

prusony
17th December, 2019, 06:15 PM
Try... (PASS!)

lucianh
19th December, 2019, 07:53 PM
Worked like a charm.

Thank you Alex!

hussamultratec
29th December, 2019, 11:44 AM
PLEASE , CAN YOU SEND THE PASSWORD OF THE FILE, THANK YOU IN ADVANCE

prusony
30th December, 2019, 06:05 AM
I don't remember pass - sorry, better read file and put it here.

T7nor
13th January, 2020, 10:19 PM
Worked like a charm.

Thank you Alex!@lucianh ... I am just curious.. So question:
Direct flash and everything working ok with that modded file?
No emulator needed?
And Your ecu is 32N?

Thanks for Your reply, in advance..[emoji4]


Sent fra min HTC U11 via Tapatalk

Kalectro
22nd February, 2021, 07:44 PM
Try... (PASS!)
I have the same vehicle. Same SW. Can you make immo off for me please?
Here is the file.

HAMDI SH
22nd February, 2021, 08:09 PM
IMMO OFF SIRIUS 32

Kalectro
23rd February, 2021, 08:25 PM
I have the same vehicle. Same SW. Can you make immo off for me please?
Here is the file.The vehicle started. Thanks Volta.

Sent from my TECNO K9 using Tapatalk

dadal
27th February, 2023, 01:49 PM
SIEMENS SIRIUS 32N S110110016 C , 8200109025 , 8200029658
with canbus
need immo off

prusony
28th February, 2023, 02:00 PM
File for programmator! Not for K-line!!
PASS ! Go to PM...
58 wire or rezisror 333......

Tagne
2nd November, 2023, 01:17 AM
hello master
SIEMENS SIRIUS 32N S110110016 C , 8200109025 , 8200029658
with canbus
need immo off thx in advanced
993889

prusony
2nd November, 2023, 12:20 PM
You read 29f200 as 29f400 (this is not right) , write this file as AM29F200 (pass in PM........)

Tagne
2nd November, 2023, 06:40 PM
You read 29f200 as 29f400 (this is not right) , write this file as AM29F200 (pass in PM........)

Worked like a charm.

Thank you prusony