BMW e36 318is nee Pop & Bang

[TSC2010]

hello
need on my tune pop and bang and rpm limiter to 7000
for any help would be great
thanks

[chrisimerk]

here try and report on the pop and bang but the rev limit is raised to 7000rpm now
been added to your tuned file it has not been checksum so make sure you do it or let tool do it depending on what your using

pass in pm

[TSC2010]

thank you very much
can you fix the checksum=? i cant do it on this
i write with eprom programmer

[Lambda1]

Thats not a tune thats some "I change some values and call me tuner" from any database... some more fuel, some ignition...
Put wideband into, log ign. retard ... and see what happend...
Or better, use simulator and rework.

Bangs can be done easily with the correct tables for fuel and ignition at this M1.7.
Pop and Bang more testing because of rev hanging.

[mexanico1971]

You can fix CKS using winols in manual mode in the last part of the file
What tool ? this is 27c256 , can"t belive in this !

[TSC2010]

can you help to correct?

[mexanico1971]

The tune is a little abused !
As someone told you before you need wideband monitoring and knock , or use ostrish and tunerpro for real time .
I"s not mandatory cks in Dme 1.7 , put the chip in the ecu and see what dtc you have !
If you got Eprom error or cks error , we see if need cks correct !

Check this
https://www.endtuning.com/bmwcodes.html

https://www.r3vlimited.com/board/forum/e30-technical-forums/engine-drivetrain/alternative-tuning-w-a-r-megasquirt-etc/375887-documentary-motronic-1-7-diy-reverse-engineering/page2
good luck

[sakhno]

[QUOTE = chrisimerk; 3749281] здесь попробуйте сообщить о тресках, но предел оборотов увеличен до 7000 об / мин, теперь
добавлен в ваш настроенный файл, это не контрольная сумма, поэтому убедитесь, что вы это делаете, или позвольте инструменту сделать это в зависимости от того, что ваш

проездной в личку [/ QUOTE]


pass