BMW F25 Working Hour Reset Please

[koolstuff]

I have a problem with a BMW F25 Original ECU is Burnt and i have changed DME, Put ISN DME into cas, reprogram EGS and car start but is in limp mode with DME DTC 1F2108 i recode DME CAS and EGS still no luck


So i read on the forum that i have to reset the working hour on DME eprom and need to do a new programming and coding of the ECU.


Can someone please help me reset the ECU Eprom so that i will do a new adaptation, i have VVDI BMW and CGDI for BMW and Autel Maxisys 908P.


Do i have to recode the ECU of just plug and play after working hour is reset?


Thanks

[jomberykaso]

Original working hours?

[roth18]

here U go my friend, re code DME

[koolstuff]

Thanks i will test and let you know

[koolstuff]

Original working hours?
I did not know original working hour, idont have autohex or bmw explorer

[koolstuff]

After flashing the eprom with reset hours car after programming and coding car started but is still in limp mode. Can somebody please help me? Or do i have to change ECU Flash And Eprom and do a recoding and reprogramming? Thanks

[koolstuff]

Any help guys??

[doctore]

did you bay same ecu as original 100%

[bearheroes]

Working hours are only needed to change powerclass...what error is on diag?


Sent from my iPhone using Tapatalk

[koolstuff]

Working hours are only needed to change powerclass...what error is on diag?


Sent from my iPhone using Tapatalk

DTC 1F2108 is the only one remaining, now i want to test if i put another flash and eprom on ECU will it work?

[roth18]

Write ori file read working hrs, is it 5,332 ???

[koolstuff]

i can't read working hour, do someone have a full dump of MEVD17.2.9 so i can test new solution?

[ahmedmph55]

Dears, i would like to reset working hours of the attached DME eeprom dumb

thank you

[leandroks]

Hi guys could anyone help me on reseting working hours on that F07 535GT N55.
MEV17.2.g.


Thanks in advance

[Maximiliano ot]

Good morning, you were able to solve it, I am having a similar problem in an f30 after decloning fem?

[erservice]

I can reset the working hours on most bmw engine ecus

[Maximiliano ot]

Hello, can someone help me to reset the working hours, I have an f30 with the same fault, thanks

[PDXAutoworks]

Hello, can someone help me to reset the working hours, I have an f30 with the same fault, thanks

Sure, put the eeprom here.