PDA

View Full Version : VW Caddy 1.9 EDC16U1 eeprom corrupted


evisdaci
20th December, 2019, 04:50 PM
Hello everyone,

I have problem with VW caddy 1.9 2005. The ECU is EDC16U1 and it have corrupted the eprom dump. So the car wont start. Engine crank but not start. Can anyone repair my eeprom dump file.


The ECU is : 03G906016DM

Eeprom is 95320
baltazar3
20th December, 2019, 05:13 PM
Hello everyone,

I have problem with VW caddy 1.9 2005. The ECU is EDC16U1 and it have corrupted the eprom dump. So the car wont start. Engine crank but not start. Can anyone repair my eeprom dump file.


The ECU is : 03G906016DM

Eeprom is 95320


Here is reqquested file ...
VIN : WV2ZZZ2KZ5X090524
PIN : 04456
IMMO STATUS : OFF
evisdaci
20th December, 2019, 05:39 PM
It is tesdet solution mate ?
evisdaci
20th December, 2019, 06:00 PM
Not working mate. Car don't start
baltazar3
20th December, 2019, 06:43 PM
Not working mate. Car don't start
Post all DTC log here
P.S.
If only immo issue car start for 1 second and stop.
What is in Your case ?
evisdaci
20th December, 2019, 07:30 PM
I have no DTC, this eeprom corrupted, i have try with another eeprom dump from another same car and car start and go off again because immo is activate, whith my original eeprom car didn't start only crank the engine.

So can you make immo off for this dump
alkazav
20th December, 2019, 07:41 PM
Try this immo off
evisdaci
20th December, 2019, 08:03 PM
Doesn't work. Car not starting.
evisdaci
20th December, 2019, 09:37 PM
I have start the car now with this eeprom dump below, but the problem now is with Steering Wheele Colum.

I have P1699 error code and the steering wheel is to hard. Only with this dump I have this error, but car start OK. Any help to repair this dump and to remove P1699 code
volorucinski
20th December, 2019, 09:46 PM
I have start the car now with this eeprom dump below, but the problem now is with Steering Wheele Colum.

I have P1699 error code and the steering wheel is to hard. Only with this dump I have this error, but car start OK. Any help to repair this dump and to remove P1699 code

If you have fvdi abrites, make immo off and you will start the car
evisdaci
20th December, 2019, 09:48 PM
I have but it can not be done, it can not give me access to upload dump anly to read it
volorucinski
20th December, 2019, 10:38 PM
You have the Immo off button, in right side
evisdaci
20th December, 2019, 10:40 PM
I know but it can do that mate.

Any help ?????
Please who can help me
evisdaci
21st December, 2019, 12:45 PM
I solve the problem. I make IMMO OFF the EPROM OK and calibrates 3 times steering wheel and now everything is oK