Peugeot 406 PU-1633A radio Dump need

[YCFYCF]

Hi
please need help with a Peugeot 406 PU-1633A radio Dump. the radio suddenly stoped working. so i removed the eprom and read , it read all FFFFFF.................. please anyone have a dump for this. if its coded with the following VIN much appreciated

radio model- PU-1633A
eeprom- 93c46
VIN- VF38BRHZE81230893.


thanks

[shooting]

Hi
please need help with a Peugeot 406 PU-1633A radio Dump. the radio suddenly stoped working. so i removed the eprom and read , it read all FFFFFF.................. please anyone have a dump for this. if its coded with the following VIN much appreciated

radio model- PU-1633A
eeprom- 93c46
VIN- VF38BRHZE81230893.


thanks

Did you try and read it with Rotated Pins? if not then this is your problem, don't write until you get a good read...

wbr

Here is your dump with new VIN once you are able to get a good read:

[YCFYCF]

Did you try and read it with Rotated Pins? if not then this is your problem, don't write until you get a good read...

wbr

Here is your dump with new VIN once you are able to get a good read:

thanks friend i will test and report....................

[sonices]

Most common problem with this radio is bad solder on front panel, if sometimes works or not. Also check what shooting said. I had few times that eeprom was damaged

[shooting]

thanks friend i will test and report....................

READ your eeprom first, if you are having "READ" problems then you will 100% have "WRITE" problems....

wbr