Problem with DPF and aditive pump Partner B9

[marcolr]

Hi mate´s
I have a problem with a DPF off in a Partner B9 with EDC17C10.
I made a file with Swiftec and I have no DTC´s present, but after a while I started the car a orange triangle light in the instruments and a message in the display with engine problem.
Once this happens the car does´n pass of 3000rpm.
The original problem in the car is with additive pump DTC´s P1434 and P1435 and I think that I have a problem with file made with swiftec because doesn´t remove aditive pump correctly.

I upload two files, original and modified with egr and fap off to see if someone can check it or made for me a correct one modified.

Thanks in advance.

[chrisimerk]

here try and report i changed a few things in your modified file

pass in pm

[marcolr]

here try and report i changed a few things in your modified file

pass in pm

This is a solution of ADS DPF Remover cracked and doesn´t work.

Regards

[Team dz]

Here this file

1-please disconnected pump
2-Disable with PP2000 dpf and Additife inside BSI

Pass : PM !

[marcolr]

Here this file

1-please disconnected pump
2-Disable with PP2000 dpf and Additife inside BSI

Pass : PM !

Same result as my file. No dtc’s in engine ecu but same alarm in dash and limp mode.
Pump is disconnected and disable in BSI.
And as before, in bsi is DTC FEB3 Aditive Pump Control Fault

https://uploads.tapatalk-cdn.com/20191228/d7942d6486f20a4b7757ee3c90892350.jpghttps://uploads.tapatalk-cdn.com/20191228/d3ec53a2baded9ef6d88655fbdc100eb.jpghttps://uploads.tapatalk-cdn.com/20191228/a317fa2796980404b67e7427e5387804.jpg
https://uploads.tapatalk-cdn.com/20191228/ed958135b04d7f81028e7b9749dad772.jpghttps://uploads.tapatalk-cdn.com/20191228/ed05cbe8320eb019b8843333f3a37fb4.jpg

[Meat-Head]

1) put more fuel in - its french
2) try removing the magbets out fuel cap
3) is there a seperate dpf module under dash to unplug

[marcolr]

1) put more fuel in - its french
2) try removing the magbets out fuel cap
3) is there a seperate dpf module under dash to unplug

Where is the separate module under dash??
I disconnect the pump directly

[Meat-Head]

I might be wrong

ADVERTISEMENT

https://www.ebay.co.uk/itm/Peugoet-407-2-0-HDI-DPF-Control-Module-Diesel-Particulate-Filter-ECU-9647428280/274156175947 (https://www.ebay.co.uk/itm/Peugoet-407-2-0-HDI-DPF-Control-Module-Diesel-Particulate-Filter-ECU-9647428280/274156175947?hash=item3fd4fb424b:g:NwMAAOSw6SNd~ka H)

[marcolr]

I might be wrong

ADVERTISEMENT

https://www.ebay.co.uk/itm/Peugoet-407-2-0-HDI-DPF-Control-Module-Diesel-Particulate-Filter-ECU-9647428280/274156175947 (https://www.ebay.co.uk/itm/Peugoet-407-2-0-HDI-DPF-Control-Module-Diesel-Particulate-Filter-ECU-9647428280/274156175947?hash=item3fd4fb424b:g:NwMAAOSw6SNd~ka H)

This module is as the Ford and Mazda 1.6hdi, but I don’t find it in the Partner

[Team dz]

Is your file showing the same error?

Check the pump path and remove everything related to it.

[marcolr]

Is your file showing the same error?

Check the pump path and remove everything related to it.

Yes, this error is in BSI. No errors in engine ecu with my file nor with your file. But the same error in BSI with both files and the same alert in instruments and display.
I don´t understand "Check the pump path and removed everything related".
I checked in BSi telecodification and changed calculators present "No aditive pump" and no FAP.

[marcolr]

Someone who can help me with a good solution?

[tunelab]

dont disable abdlue in bsi try change to other config try one by one sure you will get solve

[Ignasvw]

Write mine solution

[marcolr]

dont disable abdlue in bsi try change to other config try one by one sure you will get solve

I tried with FAP and pump disabled and enabled and no diference. Always the same result

[marcolr]

Write mine solution

Your file works PERFECT!!!!!!

Thanks mate!!!

[tunelab]

here you must be good to go

[marcolr]

here you must be good to go

I try your file and works well too and it has a lot of diferences with Inasvw file, but both works with any fault code.

Thanks

[Meat-Head]

Your file works PERFECT!!!!!!

Thanks mate!!!

Well press his thanks button not just write it

[marcolr]

Well press his thanks button not just write it

Mate. Before writing thanking the file to Inasvw, I had already pressed his thanks button and added a good reputation to him.
Thanks are public and you can see it, so better you look a little before writing to add posts.

Regards

[Borisvergara]

hello friend I write in the same thread because my problem is the same I leave the original file for your help thank you very much

[marcolr]

For you, I hope it helps you.

Regards