renault clio

[willywilson]

:(hi does anyone no how to replace a washer pump on a renault clio year 2000 model.

[ziggystardust]

engine and so on

[cristec]

Hi they are usually fitted in a recess moulded into the washer bottle, they are a push fit into a rubber seal, a two pin socket on the pump will need to be unplugged, and 1 or 2 hoses disconnected, some cars have two pumps, one for the front and one for the rear.
Depending on the year, it might be in the scuttle in front of the windscreen, or in the front inner wings, look where the filler for the washers is.

HTH

[smirnoff_rules]

be carefull when fitting the new pump ,, as u push the new on in make sure the neck is in the rubber seal if your slightly off it pushes into the watcher bottle and u will never get it out and need a new one , and they never have them in stock , if they have get one just in case , there only pennys

[poonamt93]

Its very easy to do yourself. Remove the washer resevoir. Disconnect power and hoses. Remove old pump and insert new one. You may need to use some vaseline or something to make it easier to slide new motor threw rubber grommet. Reverse the prior steps fill with fluid and you are all set.
Good Luck!!

[fusionbubu]

http://images.forum-auto.com/mesimages/169466/lave%20glace.JPG