Peugeot Bipper 1.3hdi fault code P1564 68 help please

[bill field]

I have a 2013 Bipper van 1.3hdi its in limp mode wont rev up 678314and i cannot clear fault code It comes back as soon as you turn ignition on and eml on.It says P1564 68 supplier fault code .Any ideas please ?? Many thanks Happy new year.

[kiszka]

I have a 2013 Bipper van 1.3hdi its in limp mode wont rev up 678314and i cannot clear fault code It comes back as soon as you turn ignition on and eml on.It says P1564 68 supplier fault code .Any ideas please ?? Many thanks Happy new year.
P1564 Exhaust Temps sender
Exhaust temp Particulate Filter

[bill field]

Any ideas how to cure it please?

[sjsephy91]

I have a 2013 Bipper van 1.3hdi its in limp mode wont rev up 678314and i cannot clear fault code It comes back as soon as you turn ignition on and eml on.It says P1564 68 supplier fault code .Any ideas please ?? Many thanks Happy new year.I solved same problem before 3 days..
I check everything and find damage on electric harness . Find downstream temp sensor and check 2 or 3 wires, pull wire one by one and you can find broken wire..
Front left, down engine installation ..

Sent from my SM-N950F using Tapatalk

[bill field]

Checked exhaust temp sender and replaced it anyway but still the same .Does anyone know what software i need to download the ecu so i can get a dpf delete done please .I have mpps but its a marrelli ecu and its not listed on there .Much appreciated thanks and Happy New year to you all