PDA

View Full Version : BMW 120 edc17cp02 errors



darius89
30th December, 2019, 08:17 PM
Hi, have Bmw 120d 2007 edc17cp02 1037389229 with errors.
Read boot with kess2

004011 DDE. Exhaust backpressure sensor before particular filter signal

004E1E DDE. Swirl-valve controller, position sensor signal

Today tested couple solutions, but nothing worked
Who could help to remove only errors. PLEASE

darius89
31st December, 2019, 08:38 AM
Hi, no solutions for this bmw ?

bobolin4o
31st December, 2019, 08:58 AM
Try this file, only these 2 errors...

darius89
2nd January, 2020, 10:26 AM
Thanks for help, but have same errors.

Car is out with unsolved problem.

bobolin4o
2nd January, 2020, 12:11 PM
Thanks for help, but have same errors.

Car is out with unsolved problem.

If the car is still there - check with this file, i was made an mistake.

darius89
7th January, 2020, 07:29 PM
Hi, car came back, loaded your new file and made test drive. ( dpf pressure sensor and swirl motor disconnected )
Now have 4 errors
4DFF Swirl valve controller, position control
4E09 Swirl valve plousibility
4D03 Exhaust back pressure sensor
4E0F Swirl flaps plousibility

Does anybody have solution ????

Ignasvw
7th January, 2020, 08:09 PM
I have solution

cupsi
7th January, 2020, 10:13 PM
Try this file, cs ok..

jurebv
7th January, 2020, 11:15 PM
SWIRL off + dtc off

Best Regards

darius89
8th January, 2020, 09:24 AM
SWIRL off + dtc off

Best Regards

Could you send pass

darius89
8th January, 2020, 05:34 PM
SWIRL off + dtc off

Best Regards

Hi, looks like second solution works. have

0000 Unknown error

But no MIL on dash and no limp .
Will make test drive and let you know

THANKS