View Full Version : 2006 subaru forester in circuit programing
kampas
3rd January, 2020, 11:03 AM
Hi guys,
need todo an odometer correction on a 2006 subaru forester.
can anyone confirm if it is safe to rear/write in circuit on this cluster? or is it like a new subaru with immobiliser info stored on the same chip.
I have attached a photo of the suggested method.
brownbajan
3rd January, 2020, 12:01 PM
are you fitting a donor cluster or your only adjusting milage on the same cluster?
kampas
3rd January, 2020, 12:01 PM
adjusting odometer on the same cluster
jomberykaso
3rd January, 2020, 01:35 PM
you can remove stepmotor without removing needles and then remove the eeprom
jomberykaso
3rd January, 2020, 01:49 PM
..... look my pictures.....
679273
679274
679275
brownbajan
3rd January, 2020, 08:04 PM
once you do the adjustment right you should not have a problem with immo, immo and milage are in different lines
jomberykaso
3rd January, 2020, 08:14 PM
once you do the adjustment right you should not have a problem with immo, immo and milage are in different lines
what about voltage variation when it is read in circuit?
brownbajan
4th January, 2020, 01:21 AM
remove eprom
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.