Flash counter reset vw crafter edc16cp34

[Pepesoft]

Hello.

Can somebody reset flash counter on this vw crafter 2.5tdi edc16cp34?
Galletto won`t do it and kess gives error also?
BDM read in attachment with Ktag.

[flag]

reset flash counter????what you need ? dpf, egr or something else?

[Pepesoft]

reset flash counter????what you need ? dpf, egr or something else?


I need to reset flahing counter.
Counts flashes via obd. Limit normally 3 and after that only bdm programmin possible.
Kess reads like this :
Writing attempted : 6
Writing succeeded : 16

So i can`t flash anythiang via obd, only bdm.
Don`t need egr or dpf off, i can do those myself.
The car has a bad remap and need to fix that and at the same trouble should be easier to flash it via obd and not by bdm if something goes wrong.

[xam4]

I very much doubt there is any limit on the number of flashes..

[Pepesoft]

I think there is a obd read/flash lock. After 3 flashes via obd, kess says ecu locked, please contact vendor... or something like that. Have happened to me before with audi and edc16u31. Normally it can be reseted via kess and ori file. Now for some reason can`t do that with kess or galletto. Seems that the counter is in eeprom, but never have to reset it in there so if someone has done help would be appreciated.

[voyager2004]

Try and report

[Pepesoft]

flashed eeprom file, now kess says wrong security code.

[voyager2004]

Leave ignition on for 40 mins, and try then

[Koom]

Hi, in Kess : Setup, try unlock ecu


Envoyé de mon iPhone en utilisant Tapatalk

[Pepesoft]

Screenshots in attachment when tryin to reset counter with ori read

[Pepesoft]

Leave ignition on for 40 mins, and try then


waited ignition for 60 mins. no luck

[xam4]

Did you try an other cable?

[tunelab]

here counter reset to 0 mate