View Full Version : diagram needed yamaha neos
Nicolas9
5th January, 2020, 02:22 PM
hi guys.
anyone has a diagram to program eeprom 93c46 from yamaha neos bike please?
eeprom is under lcd.. thats a bit ~~~~ed.
thnx.
jomberykaso
5th January, 2020, 03:10 PM
......................
679690
679691
neo24h
18th August, 2023, 09:59 PM
Hi , Can someone check if this is correct read
yamaha neos 4t 9346wt
Thanks
clusters
18th August, 2023, 10:16 PM
All ff ff ff
neo24h
18th August, 2023, 10:48 PM
All ff ff ff
re-reading
clusters
18th August, 2023, 11:01 PM
Read byte swapped, but mileage is 22296
neo24h
18th August, 2023, 11:06 PM
thanks for the answer, does the setting 8 bit or 16 bit matter?
Jardel
19th August, 2023, 02:15 AM
It matters a lot! But in the case of this 93c46 the reading only swaps the bytes... Read in 8 bits usually if it has an 'a' suffix, for example "93c46a" or if it is a series "93lc46", with pin 6 connected to gnd. It's not a general rule, but they're usually set up like this.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.