Renault ECU decoder Connections

[parapilot]

Hi all,

Im have got a Safir 2 ECU i need to decode, with the ecu decoder, But im not to sure about the connections. You need a relay for this type of ECU which iv not used before. How do you connect up the relay, and anyone got a link for one that would be sutable? Also, connecting power etc to the box, do you just splice it into the 12v and ground cables running from the decoder?

Any help / pics would be great! i have the manual, just not sure how to connect.

Thank You
Jamie.

[jogi]

hi,

Im have got a Safir 2 ECU i need to decode, with the ecu decoder, But im not to sure about the connections. You need a relay for this type of ECU which iv not used before. How do you connect up the relay, and anyone got a link for one that would be sutable?

Any 12V DC relay with reasonable power consumption. You need also a lamp - max 3W, that's the limit.

regards

[arvydax]

Hi, can help to connect......

[parapilot]

Spot on arvydax, Just what i needed. Thanks!!

[taxi300]

bonsoir j'ai le meme probleme est ce que je pourrai savoir comment je dois faire connecter entre le decodeur et ecu merci de me repondre

[taxi300]

Hey I have the same problem is that I can know how I have to connect the decoder and ecu thank you for reply

[taxi300]

thank you very much for the manual very nice

[power4car]

thanks about this info

[darwins]

Dear Group

I have one of these : http://www.tek-tronics.co.uk/product_info.php?cPath=34&products_id=59 (http://www.tek-tronics.co.uk/product_info.php?cPath=34&products_id=59)

Done a fair few units, but never a Safir2, I have a couple of questions can you help...

Does the bulb flash continuosly during decode ?

When its decoded does the light still flash when powered up on bench ?

Thanks

Darwins..

[grinovsky]

Hi, can help to connect......

mmmmm very interesting PDF have you got other like this for peugeot?:rulez:

[obdmaster]

Dear Group

I have one of these : http://www.tek-tronics.co.uk/product_info.php?cPath=34&products_id=59 (http://www.tek-tronics.co.uk/product_info.php?cPath=34&products_id=59)

Done a fair few units, but never a Safir2, I have a couple of questions can you help...

Does the bulb flash continuosly during decode ?

When its decoded does the light still flash when powered up on bench ?

Thanks

Darwins..

For safir 2 ecu:
bulb flashes as decoding m8. before start decode must be in advanced 1, press mode button once.then start button

Will go on for about 4 hours m8

After decode bulb stays lit continously bar on early safir2 where bulb comes on then goes off after few seconds

[darwins]

Thank you obdmaster for this information..:beerglass:

My decoder is faulty, it's not driving the relay through yellow cable, checked joints etc..... :(

I carried out the process in this post: http://www.digital-kaos.co.uk/forums/f178/renault-clio-1999-1-2-43kw-151224/ It has deffo cleared the IMMO just need to hook up to a car later and see if the unit still works :)

If i don't call back on this by the end of today its worked...

Darwins