View Full Version : ODO SUPPORT ACCENT 2009
chowan
6th January, 2020, 11:50 PM
Hi, need support for change km for hyundai accent 2009
memory 93s56
I read by 93c56, and I compare and is good the info, I can read and write the information with 93c56 x16 bit
181913km original
need 98900
tazz75
6th January, 2020, 11:57 PM
Hy...here...try and report ...
chowan
7th January, 2020, 12:23 AM
fail write, I cannot write with 93c56, fail verification
tazz75
7th January, 2020, 12:25 AM
Try that way than...
tazz75
7th January, 2020, 12:28 AM
Wich tool u use for read/write ?...
chowan
7th January, 2020, 12:34 AM
cpt i used for read memory, but this tool dont have 93s56, and I read by 93c56.
I tryed to read by upa original and appear when I reader 00000 all file line
tazz75
7th January, 2020, 12:35 AM
And you was desoldered the eprom ?
chowan
7th January, 2020, 12:36 AM
yes, i desoldered from dash, I work with apart eeprom
tazz75
7th January, 2020, 12:41 AM
Don't you have Carprog or another eprom programmer ? ....
tazz75
7th January, 2020, 12:43 AM
Or try to erase first the eprom ...and after that rewrite..was working for me for some eproms...
jomberykaso
7th January, 2020, 01:11 AM
In Upa you have to select 93s56
chowan
7th January, 2020, 01:14 AM
upa original, upa chinesse, cpt, iprog
chowan
7th January, 2020, 01:17 AM
In Upa you have to select 93s56
I tryed to read by upa, always is the first option but when I readed by adapter, appear 000000000 not read good, because not appear information
jomberykaso
7th January, 2020, 01:55 AM
My Upa 1.3 clone reads good 93s56 but I have not tested with Upa-s...only in my clone
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.