PDA

View Full Version : Opel Omega NCDC 2015 help


andrzej8711
7th January, 2020, 04:41 PM
Hello. I have a problem with the radio in Opel Omega 2001r.
Display Saffe is displayed and the steering wheel buttons do not work. I have an eprom dump from the radio and display. Is it enough to just log in the radio again? Please generate a code. Thank you
shooting
7th January, 2020, 05:14 PM
Hello. I have a problem with the radio in Opel Omega 2001r.
Display Saffe is displayed and the steering wheel buttons do not work. I have an eprom dump from the radio and display. Is it enough to just log in the radio again? Please generate a code. Thank you

Pair radio using 1909 with TECH2 OBDII tool

wbr
andrzej8711
7th January, 2020, 05:40 PM
I will try tomorrow and let you know what happened. thank you
andrzej8711
8th January, 2020, 01:41 PM
Hello. Unfortunately it didn't work out. Can anyone check again if the code is good?
shooting
8th January, 2020, 02:03 PM
Hello. Unfortunately it didn't work out. Can anyone check again if the code is good?

PIN is 100% correct...

wbr
bank
8th January, 2020, 03:26 PM
Can anyone check again if the code is good?
Code for display is 1909, it correct. But radio can be with another code.
Post dump from 24c64 (CDC unit of 2015)
andrzej8711
8th January, 2020, 06:05 PM
It turns out that the radio probably has a different code. Is it possible to save a logged out batch to 24Lc16 or is the code saved elsewhere?
andrzej8711
8th January, 2020, 07:20 PM
And is anyone able to change the code in the file from the display 1909 to 4776 because in immo is just such a code and it may be that someone replaced the display. I will add that the car was purchased with such a problem
shooting
8th January, 2020, 08:49 PM
And is anyone able to change the code in the file from the display 1909 to 4776 because in immo is just such a code and it may be that someone replaced the display. I will add that the car was purchased with such a problem

This model is ALL done with TECH2 via OBDII, unregister display then register with new PIN

wbr
bank
9th January, 2020, 09:03 AM
It turns out that the radio probably has a different code. Is it possible to save a logged out batch to 24Lc16 or is the code saved elsewhere?
Post dump from 24c64 (CDC unit of 2015), 24c16 doesn't store code
bank
9th January, 2020, 09:05 AM
And is anyone able to change the code in the file from the display 1909 to 4776 because in immo is just such a code and it may be that someone replaced the display

It won't help. You nned code for radio, then with unregistered display using code from radio you can unregister radio and then pair radio+display using code from car
Guide for non-Tech2 users
andrzej8711
9th January, 2020, 11:46 AM
Hello. I don't have TECH2 only Opcom and I can't change the code on the display. Can't change the code in the file?
shooting
9th January, 2020, 12:25 PM
Hello. I don't have TECH2 only Opcom and I can't change the code on the display. Can't change the code in the file?

OPCOM Can't do it, does NOT support this radio.... buy a TECH2
(Read Post#2 and Post#9 again)

wbr
andrzej8711
9th January, 2020, 04:56 PM
Can you ask for a code check from this batch?
shooting
9th January, 2020, 05:07 PM
Can you ask for a code check from this batch?

Bad read, these don't have a code, they have pairing PIN

wbr
bank
9th January, 2020, 08:33 PM
OPCOM Can't do it, does NOT support this radio....


:ridinghorse:
shooting
9th January, 2020, 10:06 PM
:ridinghorse:

Read properly before commenting! this is NCDC2015 model not NCDC2013

wbr
resit
29th February, 2020, 05:21 AM
Hi guys I bought a NCDC 2015 with CID to replace CCRT 2008 with non colored display. I Don't have the codes for radio and display but the seller told me to use them together so they won't ask for a code. Do you know if it is true? and do I need additional/different wiring? I'm a newbie so I'm sorry if I'm in the worng place. Also I sea people pasting batch files. How could I extract mine?
shooting
29th February, 2020, 10:08 AM
Hi guys I bought a NCDC 2015 with CID to replace CCRT 2008 with non colored display. I Don't have the codes for radio and display but the seller told me to use them together so they won't ask for a code. Do you know if it is true? and do I need additional/different wiring? I'm a newbie so I'm sorry if I'm in the worng place. Also I sea people pasting batch files. How could I extract mine?

If they came out paired then at most a simple add with Tech2 will be ok.
If it askes for PIN then read Display for PIN

wbr
resit
1st March, 2020, 05:48 PM
If they came out paired then at most a simple add with Tech2 will be ok.
If it askes for PIN then read Display for PIN

wbr


Thanks for the answer. I didn't understand '' If it askes for PIN then read Display for PIN '' part. How can I read display? I own an OPCOM but I can find Tech2. Is ''readin the display'' process requires a Tech2 or other devices, also is there any tutorial on how to doit correctly?

Also do you know if the wiring is different than CCRT2008 or can I simply replace the screen and radio with NCDC2015?
shooting
2nd March, 2020, 09:32 AM
Thanks for the answer. I didn't understand '' If it askes for PIN then read Display for PIN '' part. How can I read display? I own an OPCOM but I can find Tech2. Is ''readin the display'' process requires a Tech2 or other devices, also is there any tutorial on how to doit correctly?

Also do you know if the wiring is different than CCRT2008 or can I simply replace the screen and radio with NCDC2015?

On this model not everything can be done via OBD, you need to remove the display and open it, then read eeprom

wbr