95910-a5600 hyundai elantra 2017 need crash help please

[Wilberg93]

hello everyone i have carprog full and i cleaned this file and im getting code b173000 before i wasnt getting this code only hard code i believe the file was not properly cleaned by carprog can someone please help me out this file im uploading is the original crashed file. thanks to all in advance. vehicle is 2017 hyundai elantra gt sedan part number is 95910-a5600

[dragon100]

Your cleared file ...

[Wilberg93]

Thanks a lot for replying and sharing. Attempted file just now and I’m still getting code b173000 the pretensioner issue. Never had that before and everything has been cracked for ohms and is up to spec has to be something with in the file not working. Do you have an idea?

[Wilberg93]

I want to add I managed to delete the code but The light is still on and no dtc found anyone has an input? Please help out

[dragon100]

No comment, specialist ...

[Wilberg93]

Okay everyone got this fixed after using the cleared file and fixing the pretensioner issue with dtc light stayed on removed battery positive and waited 5 minutes connected back and done. Everything went away!

i want to add the file i used was from dragon1000 thank you very much sir!
reason the code kept coming out was because anchor pretensioner was bad so i bypassed it with 2.7ohm resistor. then the light stayed on and figured i had to do a complete reset. so i rmoved the battery terminal positive and once put back together everything working like gold.