PDA

View Full Version : renault symbol 2017


SxL'.xll
8th January, 2020, 10:37 PM
hello i Read eeprom file from obd with renolink i have
158169
need 98000
jomberykaso
8th January, 2020, 11:48 PM
Im not sure about your reading, it has a lot of data missing from address 02B0 to 07F0, this eeprom should be a 95160 .

However I see 158169 kms in line 0084 to 0088.

If you want to try change from this: 24 96 D9 69 02 to this: 2F 81 D0 7E 01

Good Luck.
SxL'.xll
8th January, 2020, 11:53 PM
If i open the dash can i found the eeprom
jomberykaso
9th January, 2020, 12:02 AM
yes..............
SxL'.xll
9th January, 2020, 11:09 AM
No only mcu abd a can transicevr
jomberykaso
9th January, 2020, 11:11 AM
Post good pictures
SxL'.xll
9th January, 2020, 11:13 AM
680619 this the mcu
jomberykaso
9th January, 2020, 11:24 AM
processor mb96f6a6rb ?
otojm
9th January, 2020, 11:54 AM
hi, i have encounter the same problem in Sandero2-2017 ,and i have read it with renolink:
what i have is: a bad reading (688 octet) so dont trust renolink for those car!
also i'm sure yu will have a message:"7F2E12 SUB FONCTION NOT SUPPORTED" when you try to
write a new km value directly.
finaly use another tool ( xtool for exemple). Regards