bmw ms43 dtc off

[mariazo84]

hello i need dtc p0500 off thanks

[naskochipa]

hello i need dtc p0500 off thanks

upload your original file and I'll do it

[Lambda1]

this wouldnt fix your problem with limp mode ;).
Send file and I will do the correct way to delete your problem without crap your code ...

[mariazo84]

pop and bags need and dtc thanks

[Lambda1]

No! You got little finger, not hole arm.
Who mess up this file?

[mariazo84]

Not found dtc is active .
Abs disconnect please


Enviado desde mi iPhone utilizando Tapatalk

[Lambda1]

Dtc irrelevant. I deactivate limp mode which will kick in with delete abs, soeed signal sensor... if you only delete dtc limp mode kicks in and you cant rev...
Your file is mess up! Read is okay but somebody has crap / mess, fool your file. Its M54B22... correct?

[mariazo84]

Abs is removed because it has a hydraulic handbrake inside. I need not to go into clean mode. What do I need to do besides erase breakdowns. the unit is ms43 safe and the m54b22 engine

[Lambda1]

File I sent you is exactly for this job ... ecu didnt limit anymore...
But your file was or better saying is messed up in some values.

[mariazo84]

permanecer igual es limitado

[Lambda1]

Because your file is messed up, how often it should be sayed?
So for best doing a update via WinKfp to get a proper clean ecu, with acutal software.
After this you will read again and sent again. DTC SUSPRESSION is never a way to get around Limp Mode... it only didnt show DTC up.

I did swap in E30, E36 and many other with M54 Engine... without any abs, dsc.
Also B22 to less power for drifting x)... B30 we had used but ended with V8 engine and supercharger.

[mariazo84]

How could I get original software that is ok? or how can I solve the software problem

[Lambda1]

Search for WinKfp (programm)!