View Full Version : Suzuki alto key blade & decode
comizelu
10th January, 2020, 03:00 PM
Hi DK,
I don't do many of these and usually is hu87 on Suzuki but not on this one...
Car is Suzuki Alto 2014.
I need to know what blade is this one and maybe if someone can decode for me pls..
Thank you https://uploads.tapatalk-cdn.com/20200110/9bad50d5de5be3818704d70679218721.jpg
Sent from my MI MAX 3 using Tapatalk
autochei
10th January, 2020, 03:26 PM
2432433421
comizelu
10th January, 2020, 03:34 PM
2432433421
Thanks!
And what blade is it pls...
Sent from my MI MAX 3 using Tapatalk
Manta1600
10th January, 2020, 04:44 PM
looks like worn MAZ24 with groove
maybe someone doesn't have HU87 in stock and cut MAZ24 with groove :)
try to insert blank HU87 and if it fits in lock you can cut it
lion0304
10th January, 2020, 11:38 PM
I think Alto use SZ12 and not HU87 or MAZ24
comizelu
11th January, 2020, 12:50 AM
I think Alto use SZ12 and not HU87 or MAZ24Can't find kd blade.any idea what blade number is?
Sent from my MI MAX 3 using Tapatalk
Manta1600
11th January, 2020, 01:03 AM
I think Alto use SZ12 and not HU87 or MAZ24
SZ12 is left blade maybe SZ11R
Manta1600
11th January, 2020, 01:22 AM
Can't find kd blade.any idea what blade number is?
Sent from my MI MAX 3 using Tapatalk
try key blade #07 MIT11 I think that this iis the same like SZ11R
lion0304
11th January, 2020, 02:13 AM
Yes it weird, SZ11, SZ12 has only 8 cuts.
Here it seem to be 10 cuts
p1et
12th January, 2020, 03:37 AM
Try HU133. That groove on this blade from 1st post I think is not neccessary and me too can't call that blade's name... Kinda strange but HU133 should be OK
comizelu
14th January, 2020, 11:14 PM
Update...
Hu87 worked fine.
Thanks everyone.
Now,what remote for this one?
Manual procedure goes in programming mode but...tried all of remotes and all vvdi remotes.Nothing! None will be accepted by car..
Found on transpondery.com that tp should be 7941 so incircuit tp. Still no joy!
Anyone already programmed a remote on these alto?
Thanks
Sent from my MI MAX 3 using Tapatalk
lion0304
14th January, 2020, 11:21 PM
Update...
Hu87 worked fine.
Thanks everyone.
Now,what remote for this one?
Manual procedure goes in programming mode but...tried all of remotes and all vvdi remotes.Nothing! None will be accepted by car..
Found on transpondery.com that tp should be 7941 so incircuit tp. Still no joy!
Anyone already programmed a remote on these alto?
Thanks
Sent from my MI MAX 3 using Tapatalk
Good new that HU87 worked. Remote is KL3 manual programming for 2011 i did before.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.